Connecting The Printer To A Wall Outlet; Connecting To A Computer - Sony UP-DX100 Operating Instructions Manual

Connecting the Printer to a Wall
Outlet
Connect the supplied AC power cord to the AC IN
connector of the printer and then to wall outlet.
UP-DX100
-AC IN
AC power cord
(supplied)

Connecting to a Computer

To print images from your computer, connect the USB
connectors of the printer and a computer (a PC with
Windows) using a commercially available USB cable,
and install the supplied printer driver on the computer.
For details on installation and operation of the printer
driver, refer to "Read me (English)" contained on the
supplied CD-ROM.
Computer
-AC IN
to wall outlet
UP-DX100
-AC IN
USB cable
Notes
• For connection, use a commercially available A-B
TYPE USB cable less than 3 meters long. As the
proper cable may differ according to the type of
computer, determine the type of cable you need,
consulting the instruction manual for your computer.
• Refer to the instruction manual for your computer, as
well.
• The supplied Sony UP-DX100 Printer Driver does not
support a network printer, nor can be used with a
commercially available printer buffer unit.
• Do not connect or disconnect the USB cable during
data transfer or printing. Proper printing results may
not be obtained.
• When connecting a computer using a USB cable,
depending on the type of computer, normal operation
may not be obtained. In such a case, use a
commercially available USB hub.
11
Preparations