Location Of Parts - Sony UP-DX100 Operating Instructions Manual

Location of Parts

Front
1
2
34 56
A 1 (on/standby) button and lamp
Press to turn on the printer, and the lamp lights. Pressing
it again makes the lamp go out, and the printer enters the
standby mode.
B Paper tray slot
Insert the paper tray.
C Operation display
When the printer is turned on, the operation mode or
menu item appears.
D MENU button
Press to display the menu item or to cancel any changes
made on the menu items that you have not registered.
E EXEC button
Press to decide the selection for each Menu items.
F Control button
Press to select a menu item and to settle the selection.
G Lamps
lamp: Lights when the Bluetooth function
is enabled.
PRINT lamp: Lights while printing is in progress, and
flashes while the printer is receiving image data.
lamp: Lights if paper runs out, the print cartridge
is out of ink, or cartridges and paper of different
types or sizes are mixed.
ALARM lamp: Lights in case of occurrence of
problem.
6
Location of Parts
E N
H O P
P U S
7
8
Bluetooth antenna (inside)
H Cartridge compartment cover
Open the cover to insert and remove the print cartridge.
I Cartridge compartment
Insert the print cartridge.
J Cartridge eject lever
Push up the lever to eject the inserted cartridge.
Note
The lever is disabled while printing.
9 0