Service Screen Setting; Test Run - Fujitsu UTY-RVNYN Installation Manual

-Note-
Not the all the setting value cannot be set to "0".
Set whether to use a spring return damper. Switch "Not in use" or "In
2
use" with [Cursor button (Up/Down)].
screen.
Damper type setting
Spring return
Not in use
Cancel:
displayed.
-Note-
ute." is displayed on the screen when turning on the power.
Set the display format of "Date format" and "Time format".
3
with the [Cursor button (Up/Down)].
ting" screen.
Change display format
Date format
Day/Month/Year
Cancel:
-Note-
Following display formats are available for setting.
Date format :
Set the "Day" "Month" "Year".
4
with [Cursor button (Up/Down)].
format" screen.
Date
Day
20
Monday
Cancel:
Set the "hour" and "min".
5
[Cursor button (Up/Down)].
"Min" can be set quickly if the button is pressed continuously.
Time
Cancel:
damper
OK:
Time format
0:00-23:59
OK:
Time format:
"Change display
Month Year
08 2012
OK:
hour
min
10: 00
OK:
6
outlets" screen when "No" is selected and press [Enter button].
Initial setting will be ended. OK?
No

9. SERVICE SCREEN SETTING

switches to the "Submenu" screen.
display returns to the "Monitor" screen.
Press the [Screen switch button (Left)] and [Screen switch button (Right)]
simultaneously for 5 seconds to switch to "Service" screen.
Submenu 1/2
[ ] Mo 10:00
Date and time
Screen
Filter sign
R.C. sensor control Off
Room temp. display
Off
Back: Setting:
Monitor
(R.C. Sensor control : Remote Controller sensor control)
Service screen
Function name
Primary unit

Test run

Function setting
Error history
Version
Zone initial setting*
9.1. Test run
Test run stops in 60 minutes. When the [On/Off button] is pressed during
When [Menu button] is pressed twice while "Monitor" screen is dis
1
the display returns to the "Monitor" screen.
Submenu
[ 1/2 ]
Date and time
Screen
Filter sign
R.C. sensor control
Room temp. display
Back:
Monitor
Press the [Screen switch button (Left)] and [Screen switch button
2
(Right)] simultaneously for 5 seconds to switch to "Service" screen.
Service
Test run
Function setting
Error history
I.U.address verification
Version
Back:
Yes
Service
Test run
Function setting
Error history
I.U.address verification
Version
Back: Setting:
Setting
Secondary unit
Mo 10:00
Off
Off
Setting:
Mo 10:00
Setting:
Mo 10:00
8