Table of Contents
Advertisement
4
Set the "Day", "Month", and "Year".
Switch the setting item with [Cursor button (Left/Right)], and adjust
with [Cursor button (Up/Down)].
When [Cancel button] is pressed, it returns to the "Change display
format" screen.
Date
Cancel:
When [Enter button] is pressed, the "Time" screen is displayed.
5
Set the "hour" and "min".
Switch the setting item by [Cursor button (Left/Right)], and adjust with
[Cursor button (Up/Down)].
"Min" can be set quickly if the button is pressed continuously.
When [Cancel button] is pressed, it returns to the "Date" screen.
Time
Cancel:
When [Enter button] is pressed, the "Confirmation" screen is displayed.
6
When setting is completed, select "Yes" with [Cursor button (Left/
Right)], and press [Enter button].
When correcting a setting, set it again as it returns to the "Language"
screen when "No" is selected and press [Enter button].
Initial setting will be ended. OK?
9. SERVICE SCREEN SETTING
When [Menu button] is pressed twice while "Monitor" screen is displayed, it
switches to the "Submenu" screen.
Press the [Screen switch button (Left)] and [Screen switch button (Right)]
simultaneously for 5 seconds to switch to "Service" screen.
Submenu
1/2
[
]
Date and time
Screen
Filter sign
R.C. sensor control
Room temp. display
Back:
Setting:
Monitor
(R.C. Sensor control : Remote Controller sensor control)
(I.U.address verification : Indoor Unit address verification)
Service screen
Function name
Test run
Function setting
Error history
I.U.address verification
Version
En-7
Day
Month
Year
20
08
2012
Monday
OK:
hour
min
10:
00
AM
OK:
No
Yes
Service
Mo 10:00AM
Test run
Function setting
Error history
I.U.address verification
Off
Version
Off
Back:
Setting:
Setting
Primary unit
Secondary unit
9.1. Test run
•
If the unit is operating, turn it off.
•
Test run stops in 60 minutes.
the test run, the test run will be canceled.
•
After completing the test run, wait enough until starting the operation.
1
When [Menu button] is pressed twice while "Monitor" screen is dis-
played, it switches to the "Submenu" screen.
If [Menu button] is pressed while the "Submenu" screen is displayed,
the display returns to the "Monitor" screen.
2
Press the [Screen switch button (Left)] and [Screen switch button
(Right)] simultaneously for 5 seconds to switch to "Service" screen.
When you select [Test run] with the [Cursor button (Up/Down)] and press the
[Enter button], following confirmation screen is displayed.
To start the test run, select "Yes" with the [Cursor button (Left/Right)], and
press the [Enter button].
In Set temp, test run is displayed.
The test run will be performed. OK?
No
9.2. Function setting
This procedure changes the function settings used to control the indoor unit
according to the installation conditions. Incorrect settings can cause the
indoor unit to malfunction. This procedure should be performed by author-
ized installation or service personnel only.
Perform the "FUNCTION SETTING" according to the installation conditions
Mo 10:00AM
using the remote controller. (Refer to the indoor unit installation manual for
details on the function numbers and setting values.)
Perform the setting during the operation is stopped.
1
When [Menu button] is pressed twice while "Monitor" screen is dis-
played, it switches to the "Submenu" screen.
If [Menu button] is pressed while the "Submenu" screen is displayed,
the display returns to the "Monitor" screen.
2
Press the [Screen switch button (Left)] and [Screen switch button
(Right)] simultaneously for 5 seconds to switch to "Service" screen.
When the [On/Off button] is pressed during
Submenu
1/2
Mo 10:00AM
[
]
Date and time
Screen
Filter sign
R.C. sensor control
Off
Room temp. display
Off
Back:
Setting:
Monitor
Service
Mo 10:00AM
Test run
Function setting
Error history
I.U.address verification
Version
Back:
Setting:
Monitor
Mode
Set temp.
►
Yes
Cool
Menu
Submenu
1/2
Mo 10:00AM
[
]
Date and time
Screen
Filter sign
R.C. sensor control
Off
Room temp. display
Off
Back:
Setting:
Monitor
Service
Mo 10:00AM
Test run
Function setting
Error history
I.U.address verification
Version
Back:
Setting:
Mo 10:00AM
Fan
Test
run
High
Hide quick links:
Advertisement
Table of Contents
