Management Function; Password Setting - Fujitsu UTY-RVNYN Installation Manual

1 ) Indoor room temperature sensor switching function
The following settings are needed when use the control by wired remote
controller temperature sensor/optional sensor.
Setting Description
No
Yes
* If setting No. is "00" :
Room temperature is controlled by the indoor unit temperature sensor.
* If setting No. is "01" :
Room temperature is controlled by indoor unit temperature sensor/remote
controller unit sensor/optional sensor.
2 ) Room temperature control switching
This setting is used to set the room temperature control method when the
wired remote controller/optional sensor is selected by the Indoor room
temperature sensor switching function.
Setting Description
No
Yes
* If setting No. is "00" :
Room temperature is controlled by the sensors of both the indoor unit and
the wired remote controller/optional sensor.
* If setting No. is "01" :
Room temperature is controlled by the sensor of the wired remote control
ler/optional sensor.
turn it on again.
3 ) Connection state of op. sensor and Temperature sensor setting
The following settings are needed when switching the sensor. Perform
setting".
Connection state of op. sensor
Optional sensor 1
Not in use
In use
* If setting "Not in use" :
Optional sensor cannot be used for room temperature sensor.
* If setting "In use" :
Optional sensor can be used for room temperature sensor.
Temperature sensor setting
Primary controller sensor
Disable
Enable
* If setting "Disable" :
Remote controller temperature sensor cannot be used.
* If setting "Enable" :
Remote controller temperature sensor can be used.
4 ) Setting record
Record the setting change in the following table.
Setting Description
Indoor room temperature sensor
switching function
Room temperature control switching
Record the connection state of op. sensor in the following table.
Optional sensor
Optional sensor 1
Optional sensor 2
13
( ...Factory setting)
Function No. Setting No.
00
42
01
( ...Factory setting)
Function No. Setting No.
00
48
01
( ...Factory setting)
Optional sensor 2
Not in use
In use
( ...Factory setting)
Secondary controller sensor
Disable
Enable
Setting No.
Memo
Not in use In use
Not in use In use
Record the temperature sensor setting in the following table.
Controller sensor
Primary controller sensor
Secondary controller sensor

11. MANAGEMENT FUNCTION

function setting.
function" screen.
Settings Items:
Function
Economy
Set temp. auto return
Set temp. range
(Set temp. auto return : Set temperature auto return)
(Set temp. range : Set temperature range)

11.1. Password setting

Preset value of password is "0000".
Change the password as necessary so that the setting change cannot be
done by other than the administrator.
The changed password should be managed properly by the administrator.
be changed.
When [Menu button] is pressed twice while "Monitor" screen is dis
1
the display returns to the "Monitor" screen.
Submenu 1/2
[
Date and time
Screen
Filter sign
R.C. sensor control
Room temp. display
Back:
Monitor
2
displayed.
the [Enter button].
Submenu
[ 2/2
Key lock select
Initial
Management
Back:
Monitor
3
press the [Enter button].
Initial
Language
Temp. unit
Password setting (Management)
Back:
Filter sign
Memo
Disable Enable
Disable Enable
Timer
On timer
Off timer
Weekly timer
] Mo 10:00
Off
Off
Setting:
is
] Mo 10:00
Child lock
Setting:
Mo 10:00
English
°C
Setting:
Management