Advertisement
2. MENU SETTINGS
(1) Press the [
screen is displayed.
(2) Select the icon of the item to be set with the [
button; press the [
Setting Screen. For details concerning settings, see the
description of the setting concerned.
2-1. Airfl ow direction setting (
2-2. On timer setting (
2-3. Off timer setting (
2-4. Current time setting (
2-5. Filter sign reset (
2-6. Economy setting (
Note
Do not proceed to the Setting Screen for items without
function that applies to indoor unit or items with restricted
use.
2-1. Airfl ow Direction Setting
(1) Select the icon of the
airfl ow direction setting in
Menu Settings. Then Press
the [
] button.
(2) Set the airfl ow directions.
● Vertical airfl ow direction adjustment
Set the vertical airfl ow
direction or swing with the
[
] or [
] buttons.
● Horizontal airfl ow direction adjustment
Set the horizontal airfl ow
direction or swing with the
[
] or [
] buttons.
(3) When the [
returns to the "Monitor Mode Screen".
En-3
] button. Setting item selection
] button to switch to the
)
)
)
)
)
)
(Swing)
: ↑
: ↓
(Swing)
: ←
: →
] button is pressed, the display
Notes
• Set airfl ow direction with the remote controller. Attempt-
ing to move the airfl ow direction louvre manually could
result in improper operation; in this case, stop operation
] or [
]
and restart. The louvre should begin to operate properly
again.
• During cooling and dry operation, do not set the verti-
cal airfl ow direction louvre in the downward position for
an extended period. Water vapor may condense near
: ↑
the outlet port and drops of water may drip from the air
: ↓
conditioner.
• The swing operation may stop temporarily when the air
conditioner's fan is not operating, or when operating at
very low speeds.
• The swing operation is not available depending on the
model. Please refer to the operating manual for the
indoor unit.
2-2. On Timer Setting
(1) Select the icon of the On
timer setting in Menu
Settings. Then press the
[
(2) Set enabled with the [
[
] buttons. Then press
the [
If set to "Enable", proceed
to (3). If set to "Disable",
return to "Monitor Mode
Screen".
(3) Adjust the time with the [
or [
] buttons.
Note
Time can be set in 0.5 H units from 0.5 H to 3.0 H, after
3.0 H which can be set up to 24.0 H in 1.0 H unit.
(4) When the [
returns to the "Monitor Mode Screen".
2-3. Off Timer Setting
(1) Select the icon of the Off
timer setting in Menu
Settings. Then press the
[
(2) Set enabled with the [
[
] buttons. Then press
the [
If set to "Enable", proceed
to (3). If set to "Disable",
return to "Monitor Mode
Screen".
] button.
] or
] button.
]
] button is pressed, the display
] button.
] or
] button.
: Disable
: Enable
: Disable
: Enable
Advertisement
