State-Based Softkeys (Bottom Keys Only) - Aastra 6757i CT User Manual

State-Based Softkeys
On the 6757i CT bottom softkeys, you can configure a specific state to display when a softkey is being used.
The following table describes the states available to configure for the softkeys.
State Description
idle The phone is not being used.
connected The current line is in an active call (or the call is on hold).
incoming The phone is ringing.
outgoing The user is dialing a number, or the far-end is ringing.
busy The current line is busy because the line is in use or the line is set as "Do Not Disturb".
The following table identifies the applicable default states for each softkey type on the IP phone.
Softkey Type
None
Line
Speed Dial
DND
BLF
BLF/List
Auto Call Distribution (ACD)
Directed Call Pickup (DCP)
Group Call Pickup (GCP)
XML
Flash
Sprecode
Park
Pickup
Last Call Return
41-001384-05 REV03 – 07.2014
(Bottom Keys only)
None
None
None
Softkeys
(state-based)
Default States
All states disabled.
idle, connected, incoming, outgoing, busy
idle, connected, incoming, outgoing, busy
idle, connected, incoming, outgoing, busy
idle, connected, incoming, outgoing, busy
idle, connected, incoming, outgoing, busy
idle
idle, connected, incoming, outgoing, busy
idle, connected, incoming, outgoing, busy
All states disabled.
connected
connected
idle, outgoing
idle, connected, incoming, outgoing, busy
Line Keys and Softkeys
None
None
None
50