KYMCO MXU 500 Owner's Manual page 583

Hide thumbs Also See for MXU 500:

Table of Contents

. BRAKE SYSTEM

REMOVAL/DISASSEMBLY/INSP

ECTION/ASSEMBLY/

INSTALLATION (ON ROAD)

Drain brake fluid (refer to the

"COMBINATION BRAKE FLUID

CHANGE/AIR BLEED (ON ROAD)"

section in this chapter).

Do not splash brake fluid onto any

rubber, plastic and coated parts. When

working with brake fluid, use shop

towels to cover these parts.

Remove all fluid hoses bolts/washers and

then disconnect the all fluid hoses.

When removing the brake fluid hose

bolt, be sure to place towels under the

hose and plug the hose end to avoid

brake fluid leakage and contamination.

Remove the two mounting bolts and remove

the relay valve.

Remove the bolt.

Remove the spring.

Chapters

Table of Contents