KYMCO MXU 500 Owner's Manual page 439

Hide thumbs Also See for MXU 500:

Table of Contents

. DRIVE TRAIN

Wipe off any grease and remove the snap ring

from the groove on the front drive shaft.

Remove the cage and boot from the front

drive shaft.

Do not disassemble the wheel side joint.

If any damages are found, replace the

wheel side joint with a new one.

Inspect the circlip and snap ring for wear or

If any damages are found, replace them with

Inspect the cage and inner surface of case

side joint for pitting, wear or damage.

If any damages are found, replace them with

Case Side Joint

Chapters

Table of Contents