KYMCO MXU 500 Owner's Manual page 219

2
. FRAME COVERS/EXHAUST MUFFLER
RIGHT/LEFT SIDE COVER
REMOVAL/INSTALLATION
Remove the seat (page 2-4) and right or left
footboard. (see page 2-7).
Remove a screw and a fastener, then
remove the right or left side cover.
＊
During removal, do not pull the joint
claws forcedly to avoid damage.
Installation is in the reverse order of
removal.
FRONT CENTER COVER
REMOVAL/INSTALLATION
Remove the two fasteners and then remove
front cover.
＊
During removal, do not pull the joint
claws forcedly to avoid damage.
Installation is in the reverse order of
removal.
METER COVER
REMOVAL/INSTALLATION
Disconnect the fuel tank breather hose from
the meter cover.
Remove the two screws from the meter
cover.
MXU 500
Fuel Tank Breather Hose
2-8