Drive Select Lever - KYMCO MXU 500 Owner's Manual

WARNING
POTENTIAL HAZARD
Failure to inspect the ATV before operating.
Failure to properly maintain the ATV.
WHAT CAN HAPPEN
Increases the possibillty of an accident or
equipment damage.
HOW TO AVOID THE HAZARD
Always inspect your ATV each time you use
it to make sure the ATV is in safe operating
condition.
Always follow the inspection and
maintenance procedures and schedules
described in the Owner's Manual.

DRIVE SELECT LEVER

CAUTION:
Before shifting, you must stop the machine
and return the throttle lever to its closed
position until the engine speed to the
specified idling speed. Otherwise, the
transmission may be damaged.
Check operation of the lever before start the
engine.
1. Make sure moving the shift lever into the "N"
position of the shift guide.
2. Turn the ignition switch to "ON" and check the
neutral indicator lamp comes on.
3. If the neutral indicator lamp does not come
on, then see page 50~51
48
for adjustment.