IMPORTANT INSTRUCTIONS WARNING! K EKd KWZ d d, , dZ t/d, d, > ZD />>hD/E d/KE Cover Of Grounded Outlet Box Metal Screws Grounding Pin Adapter Grounding Means Grounding Fig. 1 SAVE THESE INSTRUCTIONS...
WM-BI-28-3421 WM-BI-28-3421 h> ^ Built / Volta e 1400W 1350W ,/', , dZ >Kt 675W NOTE: This appliance must be electrically EK , dZ wired and grounded in accordance with local codes. In the absence o cal codes, DKdKZ , dZ 14.5W...
WM-BI-43-5123 WM-BI-43-5123 h> ^ Built / Volta e 1400W ,/', 1350W , dZ >Kt 675W NOTE: This appliance must be electrically EK , dZ wired and grounded in accordance with local codes. In the absence o cal codes, DKdKZ , dZ 14.5W us the current CSA C22.1 Canadian Elec DKdKZ &>...
Page 8
WM-BI-43-5123 WM-BI-43-5123 h> ^ Built / Volta e 1400W ,/', 1350W , dZ >Kt 675W NOTE: This appliance must be electrically EK , dZ wired and grounded in accordance with local codes. In the absence o cal codes, DKdKZ , dZ 14.5W us the current CSA C22.1 Canadian Elec- DKdKZ &>...
WM-BI-58-6421 WM-BI-58-6421 h> ^ Built / Volta e 1400W ,/', 1350W , dZ >Kt 675W NOTE: This appliance must be electrically EK , dZ wired and grounded in accordance with local codes. In the absence o cal codes, DKdKZ , dZ 14.5W us the current CSA C22.1 Canadian Elec- DKdKZ &>...
WM-BI-76-8221 WM-BI-76-8221 h> ^ Built / Volta e 1400W ,/', 1350W , dZ >Kt 675W NOTE: This appliance must be electrically EK , dZ wired and grounded in accordance with local codes. In the absence o cal codes, DKdKZ , dZ 14.5W us the current CSA C22.1 Canadian Elec- DKdKZ &>...
WM-BI-106-11524 WM-BI-106-11524 h> ^ Built / Volta e 1400W ,/', 1350W , dZ >Kt 675W NOTE: This appliance must be electrically EK , dZ wired and grounded in accordance with local codes. In the absence o cal codes, DKdKZ , dZ 14.5W us the current CSA C22.1 Canadian Elec- DKdKZ &>...
INSTALLATION OVERVIEW NOTE: BEFORE YOU INSTALL SITE SELECTION all. re et o e all Power supply Wire Gage relat stalla- Voltage Wire Gage Fuse 15 DW Wall switch / t hermostat Wire Gage Volta e Wir ' e 5 Volts re err PACKAGING LIST WARNING:...
Page 13
INSTALLATION OVERVIEW & re 1 & re 2 & re 3 ro t. & re 4 ar store...
PACKAGE CONTENTS & KEdEd^ Description Quantity Picture Part Screw 0.16 in. x 1.0 in. Wall Plug 0.3 in. x 1.5 in. Wood Screw 0.16 in. x 0.6 in. Screw 0.16 in. x 0.3 in.
Page 15
NEW CONSTRUCTION OR RENOVATION & CAUTION: stur ate at leas r et & &>KKZ stor re a ate the si > a e at leas other able WARNING: WARNING: To re e t o t t h sa outlets or r .
Page 16
FIREPLACE INSTALLATION BUILT IN NOTE BEFORE YOU INSTALL & all s & & re 6 & re 7 Wall...
Page 17
& re 8 NOTE: BEFORE YOU INSTALL Sta es It is str re s be all br to the all s rs ar & e sure it is le el. to the e & & & or st all. & re 9 &...
OPERATING THE UNIT GETTING POWER TO THE UNIT & re 17 1. Ma e sur K&& re er Wall & ur al outlet. WARNING: outlets or r . To r e the ris...
Page 21
OPERATING THE UNIT DISPLAY AND FUNCTIONS & re 18 ra-re si als i a.IR: °F b.ON/OFF: (Power indicator) °C IZ KE K&& &> M/ /^W> Y , T TIDZS DZS The i ill be o c.FLAME/EMBERS: (Flame light and embers light indicator) ℉...
Page 22
REDUCING EMBERS LIGHT INTENSITY: INCREASING EMBERS LIGHT INTENSITY: KE K&& HEATER SWITCH: KE d K&& dDW , d ℉. K&& KE K&& HIGH HEATING LEVEL: ℃ LOW HEATING LEVEL: ℃ TEMPERATURE ADJUSTING: ℉ ℉ ℃ ℃ ℉ ℃ ℉ ℃...
Page 23
& re 20 POWER: WKtZ &> M , T TIDZ FLAME: HEAT: ℉ 20℃ ℉ ℃ ℉ ℃ ℉ 0℃ ℉ 20℃ (II) ℉/℃ ℉ TIMER:...
REPLACING THE REMOTE CONTROL BATTERY When the remote control stops operating or its range seems reduced, it is time to replace the batteries with new ones. Remove the batteries if the remote control won’t be used for a long period of time. 1.
CARE AND MAINTENANCE CLEARANCE TO COMBUSTIBLES Keep electrical cords, drapery, furniture and other combustibles at least 3 ft. from the front of the heater and away from the sides. CLEANING TRIM Clean the metal trim using a soft cloth, slightly dampened with a citrus oil-based product and buff with a clean soft cloth.
FIREPLACE MAINTENANCE WARNING: er be ore e or to r e the ris LED LIGHT BULB REPLACEMENT > ht bulbs are to be r rer t’s ser WARNING: LED LIGHT REQUIREMENTS CAUTION: UNIT DISPOSAL stes. T re e to the e o trolle te the...
TROUBLE SHOOTING WARNING Disconnect power before performing any maintenance and allow to cool before servic- SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION & & & K&& KE W > > loose. t tr ther er t sible r er ailure rea rea rat- or r...
Need help?
Do you have a question about the WM-BI-28-3421 and is the answer not in the manual?
Questions and answers