Operator Convenience Settings - intervolt DCC Pro Installation & Operation Manual

Operator Convenience Settings

The Remote Display also allows certain changes to be made at any time or
'on the y' . There are three options which can be con gured for operator
convenience details as follows;
1) Option 1: The keypad beeper.
2) Option 2: The audible alarm.
26
This option simply turns the keypad beeper, also known as
'button clicks' , on or o . In default mode the keypad beeper
is enabled and can be disabled at any time.
i. Press and hold the
and the text KEY BEEP appears.
ii. Press the button again and the word On will appear
OK
above the text line.
iii. Press or
iv. Press the button to con rm your choice.
OK
v. Press the button to exit (or wait 5 minutes for timer to
AB
automatically exit).
This option allows the operator to enable or disable the
audible alarm which operates in conjunction with the warning
system. By default the audible alarm is enabled and the
icon will be displayed on the main screen. The icon will
disappear when the audible alarm is disabled. In the event of a
warning condition the audible alarm can still be muted even if
it is enabled. In any warning condition, pressing the
serves as acknowledgment of the problem and automatically
mutes the audible alarm at the same time.
i. Press and hold the
and the text KEY BEEP appears.
ii. Press the or
AUD ALARM appears.
iii. Press the button again and the word On will appear
OK
above the text line.
iv. Press or to toggle between On or OFF.
v. Press the button to con rm your choice.
OK
vi. Press button to exit.
AB
button until an audible beep is heard
OK
to toggle between On or OFF.
button until an audible beep is heard
OK
to toggle the selection until the text
button
OK