Sirius Range Hoods SU900 Installation Instructions Manual page 7

There are four holes on the inside of the
SUT900 to fix the unit into the edge of
the base of the wooden hood (refer to
figure 4).
fig. 4
Installing a Adjustable Pro Liner with
SU901. Once the cut out has been done
install the Adjustable Pro Liner and make
sure it lines up with the cut out in your
cabinet. Screw it to the 4 hole locations
(refer to figure 5).
fig. 5
Install the front part of the liner adjusting
it to the depth of the cabinet. (refer to fi-
gure 6).
fig. 6
Screw it to the 3 hole locations.
Attention: be sure the cabinet has a mi-
nimum thickness of 0.75" on the 4 sides.
MATERIALE:
Descrizione:
SPESSORE:
Disegnato da:
RAGGIO PIEGA
n° disegno:
Data creazione:
lunedì 16 aprile 2007
MATERIALE:
Desc
SPESSORE:
Dise
RAGGIO PIEGA
Il pr
nes
7