Effects Section - Novation SuperNova II User Manual

90-260v, 50-60hz
Hide thumbs Also See for SuperNova II:
Table of Contents

Advertisement

EFFECTS SECTION

This section contains all the Knobs & buttons associated with the Effects Section.
There are 7 effects available on each Program in the Supernova II
Rack.
Delay Level - Knob
This knob adjusts the level of the Delay effect to be assigned to the selected Program. Turning this knob fully anticlockwise will
allow the signal to be unaffected by the Delay, turning this knob fully clockwise will fully implement the Delay effect.
Menu - Button ( Delay )
When this button is pressed a series of pages is available on the display containing parameters relevant to this section.
In the Delay section there are 4 pages available. These are selected using the page Up & page Down buttons to the left of the dis-
play.
There are a maximum of 2 parameters displayed on any page. One for each line on the display. The upper & lower Data knobs on
the right of the display are used to alter these parameter's values.
Page 1 looks like so:
Delay time
Feedback
The higher parameter is "Delay time". In this case with a value of 080.
This parameter determines the Delay time of this effect. . Use the upper Data knob to adjust this parameter. The range of this para-
meter is 00 to 127. This parameter is memorised with a Program in Program Mode or memorised with a Program or Performance
in Performance Mode depending on the value of the Part's "Part FX" parameter.
NOTE:
NOTE:
If the Sync ( Delay ) parameter is set to anything but "Off", this parameter will not work
The lower parameter is "Feedback". In this case with a value of 020.
This knob determines how much feedback there is in the Delay effect. Use the lower Data knob to adjust this parameter. The high-
er the value of this parameter the more "Repeats" are in the delayed signal. The range of this parameter is 000 to 127. This para-
meter is memorised with a Program in Program Mode or memorised with a Program or Performance in Performance Mode
depending on the value of the Part's "Part FX" parameter.
Effects
delay
distortion
menu
menu
reverb
pan/
trem
menu
menu
chorus
EQ
comb filter
flanger
phaser
special
menu
menu
O8O
O2O
98
PRO-X

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents