Effects Section - Novation Nova Owner's Manual

This section contains all the knobs & buttons associated with the Effects Section.
There are 7 effects available on each Program in the Nova.
Delay
Reverb
Chorus
Dist/EQ/Config
Pan
Vocoder
These buttons select the effect that will assigned to the Effect knob & which set of effects parameters will be displayed when the
Menu button is pressed. i.e. If the Delay button is pressed ( lit ) the the effect knob controls the amount of Delay & the Delay
parameters are displayed when the menu button is pressed, similarly if the Reverb button is pressed ( lit ) then the effect knob con-
trols the amount of Reverb & the Reverb parameters are displayed when the menu button is pressed. etc. etc.
Effect - Knob
This knob controls the amount of effect that is currently selected in the effects section. i.e. If the Delay button is pressed ( lit ) the
the effect knob controls the amount of Delay, similarly if the Reverb button is pressed ( lit ) then the effect knob controls the amount
of Reverb. etc. etc. Fully anticlockwise no effect will be heard & as the knob is rotated clockwise more & more effect is added.
When the Vocoder button is selected the knob controls the balances between the Carrier, Modulator & Vocoder output signals. At a
position of 000 the Program ( Carrier ) only will be heard. Turning the knob to the mid position will fade this into the Vocoder's out-
put. At the Mid position only the Vocoder's output will be heard. Tuning the knob clockwise from the mid position fades out the
Vocoder's output & fades in the Modulator's signal. At the fully clockwise position only the Modulator will be heard. The range of
these parameters is 000 to 127. This parameter is memorised with a Program in Program Mode or memorised with a Program or
Performance in Performance Mode depending on the value of the Part's "Effects Used" parameter.
NOTE: NOTE:
Setting the Vocoder balance to anything other than 000 activates the Vocoder.
NOTE:
NOTE:
When a Performance / Program, "[V]" will appear after the Performance / Program name.
Menu - Button ( Delay selected )
When this button is pressed a series of pages is available on the display containing parameters relevant to this section.
In the Delay section there are 4 pages available. These are selected using the Page Up & page Down buttons to the left of the display.
There are a maximum of 2 parameters displayed on any page. One for each line on the display. The "Fast Data" Knobs on the right
of the display are used to alter these parameter's values.
Effects
menu delay reverb
copy dist/EQ
config
- Button
- Button
- Button
- Button
- Button
- Button
chorus..
effect
pan.. vocoder
83

EFFECTS SECTION