Table of Contents
Advertisement
DISPLAY SECTION
p
o
l
y
p
h
o
n
i
c
s
y
n
t
h
e
s
i
s
e
r
bank
page
data
prog
The display shows the currently selected Performance or Program Name, Bank & Number. When editing Knobs on the front panel,
the relevant parameter name & value is displayed.
Data - Knobs
When editing parameters in Menus, the upper Data Knob on the right of the display is used to edit the higher parameter's value.
Similarly the lower parameter's value can be edited in the same way using the lower Data knob. If the display is showing the
Program or Performance name then the higher Data knob can be used to select Banks & the lower Data knob can be used to
select sounds within the currently selected Bank.
Bank - Buttons
These buttons are used to select the current bank of Programs or Performances. If the display is showing the Program or
Performance name then the higher Data knob can be used to select Banks as well.
Prog - Buttons
These buttons are used to select the sound within the currently selected Bank. If the display is showing the Program or
Performance name then the lower Data knob can be used to select sounds within the currently selected Bank.
Page - Buttons
When editing parameters in Menus, there are usually several "Pages" within each menu. The Default page on pressing any menu
button is the page selected when the Globals were last saved. Higher pages can be accessed by pressing the "Page Up" button &
lower pages can be accessed by pressing the "Page Down" button.
NOTE:
NOTE:
The page buttons can also be used in conjunction with the keys on the keypad to directly enter note values into parameters such
as "Range" in Part edit of Performances ( see page 118 for details ) & "Tuning" of Drum Programs. ( see page 114 for details )
53
Hide quick links:
Advertisement
Table of Contents
