Table of Contents
Advertisement
3.3 Main Function
To select any functions, press MENU button until the required one is shown on the display.
Select the function by ENTER button and the display will blink. Use DOWN and UP button to
change the mode. Once the required mode has been selected, press ENTER button to
setup or it will automatically return to the main functions without any change after idling one
minute. Back to the functions without any change press MENU button. The main functions
are shown below:
7A
DMX 512 Address Setting
Press the MENU button up to when the
button and the display will blink. Use DOWN and UP button to change the DMX 512 address.
Once the address has been selected, press ENTER button to setup or automatically exit
menu mode without any change after one minute. Back to the previous functions without
any change press MENU button.
Slave Mode
Press the MENU button up to when the
button and the display will blink. Use DOWN and UP button to select the
fixture as master) or
(set the fixture as slave). Once the mode has been selected,
press the ENTER button to setup or automatically return to the main functions without any
change after one minute. To go back to the functions without any change press the MENU
button again.
Display Inverse
Press MENU button until
is blinking on the display. Use DOWN and UP button to
select
(display normal) or
LED display
Press the MENU button up to when the
button and the display will blink. Use DOWN and UP button to select
always on) or
(display off 20 seconds after exit menu) mode. Once select, press
ENTER button to setup or exit menu mode without any change after one minute. Back to the
functions without any change press MENU button again.
Manual setting color
Press the MENU button up to when the
button,
and
use
DOWN
and
is shown on the display. Pressing ENTER
is showing on the display. Pressing ENTER
(display inverse), press ENTER button to setup.
is shown on the display. Pressing ENTER
is shown on the display. Pressing ENTER
UP
button
to
select
8A
(set the
(display
(0-255)
or
Advertisement
Table of Contents
