Operation; Control Panel Description; Control Options; Dmx Programming - Iluminarc Colorist Panel 8Qa User Manual

Operation

4. Operation
P 01–10 are fully
configured
programs and
cannot be
modified.
10

Control Panel Description

Button
<MODE> Exits from the current menu or function
Enables the currently displayed menu or sets the currently selected
<ENTER>
value in to the current function
Navigates upwards through the menu list and increases the numeric
<UP>
value when in a function
Navigates downwards through the menu list and decreases the
<DOWN>
numeric value when in a function

Control Options

You can set the Colorist™ Panel 8Qa start address in the 001–512 DMX range. This allows
for the control of up to 51 products in the 10-channel 10CH personality.

DMX Programming

Carry out all the programming procedures indicated below from the control panel. Refer to the
Menu Map to learn how the menu options relate to each other.
Use <ENTER> and <MODE> to change levels in the Menu Map. Use <UP> and <DOWN>
to select from among the Menu Map options.
1. From the Main Level select any DMX personality: 4-CH, 6-CH, or 53CH.
2. Go to d and select a starting DMX address (1–512).

Static Colors

1. Go to C--.
2. Select a color (C 1–15).

Auto Play

1. Go to P--.
2. Select an auto program (P 1–5).
3. Go to S--.
4. Select an auto program speed (S 1–100).

Custom Color

1. Go to U--.
2. Select a color (r, g, b, or A).
3. Configure the color value (0–255).
4. Repeat steps 4 and 5 for the other colors.
Function
Colorist™ Panel 8Qa User Manual Rev. 2