Configuring System Alert Settings - Sony NSR-1100 User Manual

Configuring System Alert
Settings
A system alert (alarm) can be generated when camera
video loss or insufficient disk space is detected. Configure
the settings for the action to perform after a system alert is
generated.
1
Click [Server] at the top of the Configuration window.
The Server Configuration screen appears.
2
Select the server for which you want to set the system
alert settings from the [Server] tree on the left of the
screen.
3
Configure the information to notify of in the system
alert on the [System Alert] tab, and click [Apply].
For details on each of the items, refer to "Setting Items
of the [System Alert] Tab" (page 102).
1 Select the check boxes for the notification items,
and configure each item.
2 Click [Apply].
The settings are saved.
102

Configuring System Alert Settings

1
2
4
Configure the action to perform after a system alert
occurs.
For details on actions, refer to "Configuring Action
Settings" (page 94).
Setting Items of the [System Alert] Tab
This tab is displayed by clicking [Server] in the
[Configuration] window, and clicking the [System Alert]
tab.
After configuring each item, click [Apply].
A VIDEO LOSS
Select the check box to notify of the image signal
becoming disconnected.
Note
Disconnection of the audio signal or disconnection of an
NSBK-A16 video signal is not a target for detection.
Camera List
This displays a list of the video loss notification settings.
Target
Select the check boxes for the cameras to be target for
notification.
Camera Name
This displays a list of the names of the cameras
registered to NSR.
A
B
C
D E F