Configuring Shadow Tours - Sony NSR-1100 User Manual

8 Click [Tour Test] to show and check the set tour.
Camera Tour Operation
In NSR, the camera tour function is achieved by
configuring the same stay duration and speed for each
position specified by a camera preset.
Notes
• The configured stay duration is applied to all preset
positions, and the configured speed is applied to all
preset movements.
• The camera tour appears with a name (P-1, P-2, ...) in
the [Tour] list on the [Camera Control] pane of the Main
screen.
Caution
Even if the values configured for the camera speed (level)
are the same, actual speeds may differ depending on the
models of camera. When configuring the settings of a tour,
be sure to test the tour to confirm the operation.
Changing Settings
1
Select the camera(s) you want to change the
registration details of on the Device Configuration
screen.
2
Click the [Tour] tab, and modify the settings of the
items you want to change.
3
Click [Set Tour].
The settings are changed.

Configuring Shadow Tours

For cameras equipped with the shadow tour function, you
can record the motions of the camera, when operated
remotely using a mouse or joystick, and configure them as
a shadow tour.
You can configure up to four tour operations (S-1 to S-4).
Note
These tours use the tour function of the camera. As a result,
the configured tour information is saved on the camera.
48
Configuring Camera Operations
To Configure a New Tour
1
Click [Device] at the top of the Configuration screen.
The Device Configuration screen appears.
2
Select the camera for which you want to configure a
tour, and then click [Tour].
The camera image appears in the preview area.
3
Configure each of the setting items.
2 3 1 4
1 Select [Shadow Tour].
2 Select the tour number you want to configure.
3 For [Resume time on inactivity], set the length of
time to wait before resuming the tour after it is
interrupted by an operation.
4 Click [Record] to start recording.
5 Adjust the camera position using the pan, tilt, and
zoom operations while confirming the image in the
preview area.
You can also select [Preset] to make the camera
move to a preset position.
6 Click [Stop] to finish recording.
7 Click [Tour Test] to display and confirm the
configured tour.
7
6
5