Sony NSR-1100 User Manual page 82

2
Click [Recurrent] to switch to recurrent view, and
click [New Record].
The New Record dialog box appears.
3
Configure each item, and click [OK].
The setting items differ depending on the type of
schedule.
Screen example: When schedule recording
2 1
For details on each of the items, refer to "Setting Items
of New Record Dialog Box" (page 86).
1 Enter a name for the schedule.
2 Select the type of schedule.
3 Select the check boxes for the days you want to run
the schedule, and configure a start time and end
time for the schedule.
4 Configure each item, as necessary.
For details on the setting procedure for alarm
recording and event recording, refer to
"Configuring Alarm Recording and Event
Recording" (page 83).
5 Click [OK].
The schedule is created.
4
Click [Apply].
The schedule is saved.
82
Configuring Recording Schedules
For details on how to view the schedule, refer to "Setting
Items of Schedule Screen" (page 85).
Configuring a Schedule for a Specific Date
and Time
You can configure a schedule for a specific date and time
to specify a date and time to run a schedule. The only
difference from a recurrent schedule is the procedure for
specifying a start and end date and time.
1
Select the camera for which you want to configure the
schedule from the [Schedule] tree of the [Schedule]
screen.
You can also select multiple cameras at once by
holding down the Shift key or Ctrl key while selecting.
3
4
2
Click [Date Time] to switch to date and time view, and
click [New Record].
5
The New Record dialog box appears.