Setting Items Of The [Alarm Out] Tab - Sony NSR-1100 User Manual

3
Configure each item on the [Alarm Out] tab, and click
[Apply].
For details on each of the items, refer to "[Alarm Out]
Tab (IO Device)" (page 93).
The Barionet alarm output settings are changed.

Setting Items of the [Alarm Out] Tab

[Alarm Out] Tab (IO Device)
You can configure the alarm output pins of NSR and
Barionet.
After configuring each item, click [Apply] to save your
settings.
This example describes the screen for configuring alarm
outputs of NSR.
Alarm Output Pin List
This displays a list of alarm output pins configured for the
NSR or Barionet selected in the tree.
Enable
Select the check boxes to enable the pins for the alarm
outputs.
No
This displays the numbers of the alarm output pins.
This item cannot be changed.
Caution
To use alarm outputs, the alarm output pin settings on
the device must also be enabled.
Name
Enter the names of the alarm outputs. They can be up
to 32 characters long.
Pulse
Select the check box when you want to specify and
enter a pulse interval. If you select this, enter the pulse
interval in [Pulse Duration].
Pulse Duration
Enter the duration in milliseconds to sustain pulse
output once it is turned on.
Invert
Select the check box to invert the polarity of the output
pins.
Enabling invert does not change the state of the current
output pins. If you turn the output pins on/off when
they are in an inverted state, the actual output signal
state is inverted to off/on.
Also, in the case of output pins of the NSR unit, state
initialization is performed according to the invert
setting at startup.
(When inverted: On at startup, When not inverted: Off
at startup)
[Alarm Out] Tab (Camera)
You can configure the alarm output pins of the camera
selected in the tree.
After configuring each item, click [Apply] to save your
settings.
Alarm Output Pin List
This displays a list of the alarm output pins configured for
the camera selected in the tree.
Enable
Select the check boxes to enable the pins for the alarm
outputs.
No
This displays the numbers of the alarm output pins.
This item cannot be changed.
Configuring Alarm Output Settings
93