Sony NSR-1100 User Manual page 42

Device List
This displays a list of the devices detected with the
automatic search.
Register
Select the check boxes of the devices to register to
NSR.
Model
This displays the type of device.
User
Enter the user name for connecting to the device.
Password
Enter the password for connecting to the device.
IP Address
This displays the IP address of the device.
Port
This displays the port number on the device side for
when connecting with the device.
The default setting is "80."
Serial No.
This displays the serial number of the device.
MAC Address
This displays the MAC address of the device.
Network
This displays the network in which the device is
corrected.
Status
This displays the current status of the device.
Caution
The user name and password for a device cannot be
changed from NSR. To change them, access the device
directly from a Web browser. If you change the user
name and password for a device registered to NSR,
you must also change the configurations in NSR.
Registration
This registers the devices with check marks to NSR, and
closes the dialog box.
Cancel
This cancels the registration and close the dialog box.
42
Registering Devices
Setting Items of Input All Dialog Box
This dialog box allows you to simultaneously configure
the same setting values to multiple selected devices for the
following setting items when registering devices detected
via automatic search.
It is displayed by clicking [Input All] in the Multiple
Camera Registration dialog box (page 41).
Select the check boxes of the items you want to set, enter
the setting values, and click [OK].
User
Enter the user name for connecting to the device. It can be
up to 32 characters and consist of alphanumeric characters
and some symbols (periods (.), hyphens (-), underscores
(_)).
Password
Enter the password for connecting to the device. It can be
up to 32 characters and consist of alphanumeric characters
and some symbols (periods (.), hyphens (-), underscores
(_)).
IP Address
Enter the IP address for the device.
When registering multiple devices simultaneously, IP
addresses are configured sequentially, starting with the
entered address.
Port No.
Enter the port number on the device side for when
connecting with the device.
The default setting is "80."
OK
This reflects the setting values in the device list of the
Multiple Camera Registration dialog box, and closes the
dialog box.
Cancel
This cancels your settings, and closes the dialog box.