Appliance Setup; Remove Glass Assembly; Remove The Shipping Materials; Clean The Appliance - Hearth & Home BV4236DBI Owner's Manual

14 14

Appliance Setup

A. Remove Glass Assembly
See Section 14.I.
B. Remove the Shipping Materials
Remove shipping materials from inside or underneath the
fi rebox.
C. Clean the Appliance
Clean/vacuum any sawdust that may have accumulated
inside the fi rebox or underneath in the control cavity.
D. Accessories
Install approved accessories per instructions included
with accessories. Contact your dealer for a list of ap-
proved accessories.
WARNING! Risk of Fire and Electric Shock! Use ONLY
Hearth & Home Technologies-approved optional acces-
sories with this appliance. Using non-listed accessories
could result in a safety hazard and will void the warranty.
E. Burner Top Installation
1. Bend the two tabs upward as shown in Figure 14.1.
2. To install the fi ber burner, mate the locating holes with
the guide sleeves. Install fi ber burner top so that it
makes full contact with the underlying burner assem-
bly.
3. Ensure that the ports in the steel burner are visible
through the holes in the fi ber burner top.
FIBER BURNER TOP
BEND TABS UP
BURNER ASSEMBLY
GUIDE SLEEVES
Figure 14.1
LOCATING HOLES
AIR SCOOP
PILOT COVER
BURNER SHIELD
Hearth & Home Technologies • BV4236DBI, BV4842DBI • 2209-900 Rev. P • 4/14
F. Lava Rock Placement
1. Add lava rock to lava rock basket. See Figure 14.2.
LAVA ROCK BASKET
Figure 14.2
37