Table of Contents
Advertisement
8
Appliance Setup
A. Remove the Shipping Materials
Remove the plastic coating and shipping materials
from the firebox.
WARNING! Risk of Fire! Close the ball valve
before installing the media template to prevent
accidental lighting. Remove the media template
before lighting the appliance.
B. Clean the Appliance
Pilot Shield
Clean/vacuum any sawdust that may have
accumulated inside the firebox.
Figure 8.1. Pilot Shield Placement
C. Optional Accessories
Install only approved accessories per instructions
included with accessories. Contact your dealer for
a list of approved accessories.
WARNING! Risk of Fire and Electric Shock! Use
NO MEDIA ON PILOT SHIELD
ONLY Hearth & Home Technologies-approved
optional accessories with this appliance. Using
non-listed accessories could result in a safety
hazard and will void the warranty.
D. Verify Pilot Shield
Ensure proper placement of the pilot shield. See
Figure 8.1. Shipping could cause it to become
displaced.
Figure 8.2. Install Media
E. Install Lava Rock Media/Glass
Media
Pour media into the burner area, evenly covering
the burner tube and the entire engine base. After
the media has been placed, remove any media
from the top area of the pilot shield. Media left
covering this area will result in delayed ignition
and reduced function of the engine.See Figure
8.2.
22
Outdoor Lifestyles by Hearth & Home Technologies Inc. • Courtyard Installation Manual • 4608-901 Rev. C • 09/18
Advertisement
Table of Contents
