DFI G5G330-P User Manual page 75

PEG/Onchip VGA Control
This field is used to select the graphics controller that will serve as
the primary boot device. The options are Auto, Onchip VGA and
PEG Port.
PEG Force X1
The options are Enabled and Disabled.
On-Chip Frame Buffer Size
This field is used to select the onboard VGA's frame buffer size that
is shared from the system memory.
DVMT Mode
This field shows the current DVMT mode.
DVMT/Fixed Memory Size
This field is used to select the graphics memory size used by DVMT/
Fixed mode.
Boot Display
This field is used to select the type of display to use when the
system boots.
Auto
CRT
LFP
The system will automatically detect the display that is
available when the system boots.
Select this option if you want the system to boot the
CRT display.
Select this option if you want the system to boot the
LFP display.
3
BIOS Setup
75