Power Connectors - DFI G5G330-P User Manual

2
Hardware Installation

Power Connectors

Use a power supply that complies with the ATX12V Power Supply
Design Guide Version 1.1. An ATX12V power supply has a standard
20-pin ATX main power connector that must be inserted onto the
J19 connector.
The system board requires a minimum of 150 Watt power supply
to operate. Your system configuration (amount of memory, add-in
cards, peripherals, etc.) may exceed the minimum power requirement.
To ensure that adequate power is provided, use a 250 Watt (or
greater) power supply.
56
1 1 1
3.3V 3.3V
-12V 3.3V
Ground Ground
PS-ON +5V
Ground Ground
Ground +5V
Ground
Ground
-5V PW-OK
+5V 5VSB
+5V +12V
2 0 1 0