DFI G5G330-P User Manual page 47

LVDS LCD Panel, LCD/Inverter Power and LCD AUX Power
Connectors
1
2
3
LCD AUX
Power
1
8
LCD/Inverter
Power
The system board allows you to connect a LCD Display Panel by
means of the LVDS LCD panel connector (J7) and the LCD/Inverter
power connector (J6). These connectors transmit video signals and
power from the system board to the LCD Display Panel. The LCD
AUX power connector (J23) is used to connect auxiliary power to
the LCD panel. Refer to the next page for the pin functions of these
connectors.
Jumper Settings
Refer to the "Jumper Settings" section in this chapter for settings
relevant to the LCD panel.
Hardware Installation
3 9
1
LVDS LCD Panel
2
4 0
2
47