Prem-I-Air EH0530 Instruction Manual page 17

6) Sleep Mode (This Mode is available when using Remote control)
The air conditioner is in operation
Press SLEEP Button, the "
The unit will switch to low speed after 2 hours.
When in cooling mode, during the first two hours, the temperature will
be increased 1
the originally set figure for 6 hours. The temperature will then return to
the originally set figure
When in heating mode, during the first two hours, temperature will be
decreased 2
than the original set figure for 6 hours. The temperature will then return
to the originally set figure.
When in dehumidify mode, the temperature will not be changed.
NOTE
In exceptional conditions of low temperature and high humidity, condensate
may accumulate at a rate faster than it can be discharged. The symbol 'E6' will
appear in the control panel. Check any blockage in drain port.
" appears on the Remote control display.
o
C per hour. The unit will then operate at 2
o
C per hour. Then temperature will be keeping at 4
Page 17
o
C higher than
o
C Lower