3) Fan Operation
Plug the Power Cord into the power outlet socket.
Turn on the unit by pressing the ON/OFF Button on the control panel.
Press the MODE Button until "
Select the fan speed by pressing the FAN Button.
4) Heating Operation
Plug the Power Cord into the power outlet socket.
Turn on the unit by pressing the ON/OFF Button on the control panel.
Press the MODE Button until "
Press the button UP or DOWN until the desired room temperature
appears on the LED. The temperature ranges from 16ºC-31ºC.
Select the fan speed by pressing the Fan button. It is recommended to
use the low fan.
NOTE: When activating the heat pump, the unit will shut off for 3-5 minutes
before starting the heating operation.
5) Auto Operation.
a) Turn on the unit by pressing the ON/OFF Button on the control panel.
b) Press the MODE Button until the "
c) Select the fan speed by using FAN button.
During AUTO mode, the unit operates at heating mode when the room
temperature is below 20
room temperature is between 20
when the room temperature is above 25
the AUTO mode.
FA
" appears on the LED display.
HE
" appears on the LED display.
AU
" appears on the LED display.
o
C. It operates at dehumidifying mode when the
o
o
C to 25
C. It operates in cooling mode
o
C. You may use the timer with
Page 16