Prem-I-Air EH0530 Instruction Manual page 15

5) TIMER
Press "TIMER" button until the Yellow light is on to set Automatic Off time
while the unit is running.
Press "Timer" button until the Yellow light is on to set Automatic On time
while the unit is in ready state.
Press either "UP" or "DOWN" buttons to set the clock to the required turn
off time or turn on for1 hour by pressing once. The adjustable time range
is 1 hour to 24 hours.
The LED will flash for 3 seconds to activate the timer, which has been
programmed.
Press the TIMER button again to cancel the setting.
OPERATION USING CONTROL PANEL
1. Cooling Operation
Plug the power cord in to the power outlet socket
Turn on the unit by pressing the ON/OFF Button on the control panel.
Press MODE Button until "CO" appears on the LED display
Press .... UP or DOWN... until the desired room temperature appears
on the LED. The temperature ranges from 16ºC-31ºC.
Select desired fan speed by pressing the FAN Button.
NOTE: During hot days, the unit will cool off the room most efficiently by setting
the temperature at the lowest and the fan speed at the highest.
2) Dehumidifying Operation
Plug the Power Cord into the power outlet socket.
Turn on the unit by pressing the ON/OFF Button on the control panel.
Press the MODE Button until the "DE" appears on the LED display.
NOTE: The unit operates at low fan speed during dehumidifying. The unit
cools room slightly during dehumidification. Keep the windows and the doors
closed to aid the effectiveness of the unit in removing moisture from the room.
The unit will perform dehumidification for 10 minutes and then stop for 4
minutes when the room temperature is lower than 15
O
C.
Page 15