Page of 2

Motorola HDT101 Quick Setup Manual

High definition off-air receiver.
Hide thumbs
   
Important Safety Instructions
Be sure to allow adequate ventilation and airflow around the HDT101 to prevent overheating.
V E N T I L A T E
2
inch space
2
inch
POWER
POWER
SIGNALLOSS
-
Position the HDT101 with at least 2 inches of space above and on all sides.
-
Do not block the slots and openings in the HDT101.
-
Do not place anything on top of the HDT101.
-
Do not position the HDT101 in an enclosed space that would restrict airflow around the unit.
-
Do not position the HDT101 near any external heat source that could raise the temperature around the unit.
CAUTION
RISKOFELECTRICSHOCK
DO NOTOPEN
CAUTION:
TOREDUCETHERISKOFELECTRICSHOCK,
DONOTREMOVECOVER(ORBACK).
NOUSER-SERVICEABLE PARTSINSIDE.
REFERSERVICING TOQUALIFIEDSERVICEPERSONNEL.
Graphical symbols and supplemental warning marking locations on bottom of terminal.
WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
TO PREVENT ELECTRICAL SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point, within an equilateral triangle, is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
REPAIRS
If you find the unit in need of repair, call Motorola Support at
1-866-668-2271
or
1-866-MOT-BCS1
.
EXAMPLE OF ANTENNA GROUNDING
Electricservice
equipment
Ground
Antennalead
clamp
inwire
Antenna
dischargeunit
(NECSection810-20)
Grounding
Groundingconductors
clamps
(NECSection810-21)
Powerservicegrounding
electrodesystem
(NECArticle250,PartH)
NEC=NATIONALELECTRICALCODE
2
inch
Visit our website at:
www.motorola.com/broadband/consumers
Motorola and the Stylized M Logo are
registered in the US Patent & Trademark Office.
Dolby Digital is a registered trademark of
Dolby Laboratories Licensing Corporation.
All other product or service names are the
property of their respective owners.
© Motorola 2004.
509926-001
02/04
MGBI
POWER
POWER
SIGNALLOSS
Motorola HDT101
High Definition Off-Air Receiver

   Also See for Motorola HDT101

   Related Manuals for Motorola HDT101

   Summary of Contents for Motorola HDT101

  • Page 1: Quick Setup Guide

    Do not place anything on top of the HDT101. Do not position the HDT101 in an enclosed space that would restrict airflow around the unit. Do not position the HDT101 near any external heat source that could raise the temperature around the unit. CAUTION...

  • Page 2

    Now proceed to the instructions for the audio connections. AUTO SCAN Before you can start using the HDT101, you need to program it with the station numbers of the over-the-air digital TV stations available in your area. This is done by simply running...

Comments to this Manuals

Symbols: 0
Latest comments: