Subnets & Dhcp - Arris NVG599 Administrator's Manual

Link: Subnets & DHCP
Subnets & DHCP
When you click the
The server configuration determines the functionality of your DHCP settings. This functionality enables the
NVG599 to assign your LAN computer(s) a "private" IP address and other parameters that allow network
communication. This feature simplifies network administration because the NVG599 maintains a list of IP
address assignments. Additional computers can be added to your LAN without the need to configure an IP
address. This is the default mode for your NVG599 device.
Private LAN Subnet
Device IPv4 Address:
Subnet mask of your LAN.
Subnet Mask:
DHCP
DHCPv4 Start Address:
DHCPv4 End Address:
: Specifies the default length for DHCP leases issued by the router. Enter lease time in
DHCP Lease
dd:hh:mm:ss (days/hours/minutes/seconds) format.
Public Subnet
Public Subnet Enable
tribute public addresses to DHCP clients; this means that IP addresses assigned to LAN clients will be public
addresses.
Public IPv4 Address
Public Subnet Mask
link, the Subnets & DHCP page appears.
The IP address of your device as seen from the LAN.
First IP address in the range being served to your LAN by the NVG599 DHCP server.
Last IP address in the range being served to your LAN by the NVG599 DHCP server.
: If you select On from the drop-down menu, you can enable a second subnet to dis-
: The IP address of your NVG599 device as seen from the WAN.
: Public subnet mask.
49