Arris NVG599 Administrator's Manual page 37

Link: Configure
Configure
When you click the
type of broadband connection should it change in the future.
Broadband Source Override
(Bonded), or Ethernet WAN.
If you switch from DSL to Ethernet or from Ethernet to DSL, the device will prcoceed to reconnect as in its ini-
tial connection to the Internet, as described earlier. See
page 21.
The WAN connection is automatically configured. However, you can adjust the
(maximum transmittable unit) value, if your service provider suggests it. The default 1500 is the maximum
value, but some services require other values (1492 is common).
If you make any change here, click the
link, the Broadband
Configure
- Auto (automatically detected), DSL - Line 1, DSL - Line 2, DSL - Line 1 / Line -2
Save
button.
screen appears. Here you can reconfigure your
"Accessing the Web Management Interface" on
Maximum allowable MTU
37