Operating the cooktop
Never heat an empty pot! This
can damage the glass ceramic
surface.
Never leave the cooktop unattended
during use!
Hot pans on the display can
cause damage to the electronics
underneath.
NEVER place hot pots or pans near
the display.
Burner control knob
The burner control knob may not be
turned beyond B I or B I/II to or 0.
Turning on
Turn the burner knob to the right until
the desired power level appears in
the display.
AutoBoost
When AutoBoost has been activated,
the burner switches on automatically at
the highest setting and then switches to
the continued cooking setting that you
have previously selected. The heat-up
time depends on which continued
cooking setting has been chosen (see
chart).
Activating
Turn the knob to the left to the
symbol and hold it until flashes
once.
Turn the knob to the right until the
desired continued cooking setting
appears.
50
During the AutoBoost time, flashes on
the display in alternation with the
continued cooking setting.
When you change the continued
cooking setting, you deactivate
AutoBoost.
Deactivating
Select a different power level during
the heat-up time.
The AutoBoost is deactivated.
Continued
cooking setting
1
2
3
4
5
6
7
8
9
Booster
The burners are equipped with a
booster two-level TwinBooster (see
"Guide to the appliance").
When activated, the power is boosted
for a maximum of 15 minutes so that
large quantities can be heated quickly,
e.g. water for cooking pasta.
You can use the booster for a maximum
of two burners simultaneously. After the
booster time has expired, the cooktop
switches back automatically to the
highest power level.
Time to boil
[min : sec]
approx. 0 : 15
approx. 0 : 15
approx. 0 : 25
approx. 0 : 50
approx. 2 : 00
approx. 5 : 50
approx. 2 : 50
approx. 2 : 50
–