Delaying The Start Of The Self Clean Program; At The End Of The Self Clean Program - Miele HR1622 Operating Instructions Manual

As soon as "Timer" is pressed, the
buzzer and the flashing indicator will
turn off.
Delaying the start of the Self Clean
program
 To delay the start of the Self Clean
program, select
 Set the time you would like the
program to start at.
 Confirm with OK.
The door will lock automatically.
and the set start time appear in the
display.
Up until the start time you can alter the
start and end time with
As soon as the start time has been
reached, the oven heating and the
cooling fan will turn on automatically.
The duration remaining will appear in
the display.
.
Start Later
Start at
.
Change
Cleaning and care

At the end of the Self Clean program

When the duration remaining reaches
00:00 h, a message will appear in the
display to tell you that the door is
unlocking.
When the door lock has been
deactivated:
–
Program Finished
display,
– A buzzer will sound if turned on (see
"Settings - Volume - Buzzer tones").
 Turn the oven off.
Acoustic and visual signals are turned
off.

Danger of burns!
Danger of burns! Wait until the oven
has cooled down before removing
any residual soiling left in the oven
compartment from the Self Clean
program.
 Wipe any residues (e.g.ash) left
behind after the Self Clean program
out of the oven compartment and off
of any accessories. The amount of
ash will vary depending on how dirty
the oven was.
Most soiling can be easily removed
using a clean, soft sponge and a mild
solution of warm water and liquid dish
soap.
Depending on the degree of soiling
before cleaning, there may be a visible
layer of soiling across the inner glass
pane on the door. This should be
removed using the scouring side of a
dish sponge or with a stainless steel
spiral sponge and liquid dish soap.
appears in the
139