Miele HR1622 Operating Instructions Manual page 147

Problem
A noise can be heard
after the appliance is
turned off.
One or several burners
flash  in the display.
The knob is not on Off;
a power level is set for
the burner. The burner
does not heat up.
 lights up in the display
or flashes in alternation
with .
flashes in the

display in
alternation with
numbers.
This display is dark.
appears
System Lock 
in the display when the
oven is turned on.
Frequently asked questions
Possible cause and solution
The fan will continue running until the appliance has
cooled down. It will then switch itself off
automatically.
The burner knob has been turned to the right or left
for more than 30 seconds.
 Turn the knob to 0. If the error message does not
go out, there is a technical fault. Call Customer
Service.
There was a power interruption during operation.
The burner has been turned on for more than 3
minutes without a suitable pan on it.
The maximum operating time for the burner has been
exceeded.
 Turn the burner knob to 0.
The burner can be started up again.
There is a fault in the electronics.
 Disconnect the power supply of the cooktop for
approx. 1 minute. If the problem persists after
reconnecting the power supply, contact Miele
Customer Service.
The time of day display is deactivated. When the
appliance is turned off, the time of day display is
turned off.
 As soon as the oven is turned on, the time of day
will appear. If you want it to be displayed
continuously, the setting to turn the time of day
display back on must be changed (see "Settings –
Time of day - Display").
There is no power to the appliance.
 Check if the circuit breaker has tripped.
The system lock  is On.
 You can unlock the oven to start a cooking
program by pressing  for at least 6 seconds.
 To permanently deactivate the lock, see "Settings
- System Lock ".
147