Guide To Using This Manual 2 Disposal; Maintenance And Repairs - Stihl TS 410 Instruction Manual

Composite resin abrasive wheels
Minimum outside diameter of
thrust washers:
Max. depth of cut:
Diamond abrasive wheels
Minimum outside diameter of
thrust washers:
Max. depth of cut:
Abrasive wheels (TS 420)
Outside diameter:
Max. thickness:
Bore diameter/spindle
diameter:
Tightening torque:
Composite resin abrasive wheels
Minimum outside diameter of
thrust washers:
Max. depth of cut:
Diamond abrasive wheels
Minimum outside diameter of
thrust washers:
Max. depth of cut:
TS 410, TS 420

Maintenance and Repairs

4.06 in.
(103 mm)
Users of this unit should carry out only
3.9 in.
the maintenance operations described
(100 mm)
in this manual. STIHL recommends that
other repair work be performed only by
authorized STIHL servicing dealers.
4.06 in.
(103 mm)
Warranty claims following repairs can be
accepted only if the repair has been
3.9 in.
performed by an authorized STIHL
(100 mm)
servicing dealer using genuine STIHL
replacement parts.
Genuine STIHL parts can be identified
by the STIHL part number, the
14 in.
{ logo and, in some cases, by
(350 mm)
the STIHL parts symbol K. The
0.189 in.
symbol may appear alone on small
(4.8 mm)
parts.
0.787 in.
(20 mm)
22 lbf ft
(30 Nm)
4.06 in.
(103 mm)
4.9 in.
(125 mm)
4.06 in.
(103 mm)
4.9 in.
(125 mm)
Disposal
Observe all country-specific waste
disposal rules and regulations.
STIHL products must not be thrown in
the garbage can. Take the product,
accessories and packaging to an
approved disposal site for environment-
friendly recycling.
Contact your STIHL servicing dealer for
the latest information on waste disposal.
English
47