Talk-a-Phone WEBS-CM-2 Configuration And Operation Manual page 9

9. With the configuration file created, the final step is to apply these settings to the communications module.
Enter the following command, and press Enter.
root:flash/> configApp admin admin@123 config.txt
10. A reboot is required after serial console configuration. Enter the following command, and press Enter.
root:flash/> reboot
11. All configurable options are available in Appendix C: Sample Serial Configuration File.
Copyright 2012 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • info@talkaphone.com• www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
WEBS-CM-2, WEBS-PA-1 and WEBS-PA-2
Configuration and Operation Manual
Page 9 of 53