Talk-a-Phone WEBS-CM-2 Configuration And Operation Manual page 23

4.7.5. Ping and Traceroute
The Ping and Traceroute page is used to perform connectivity tests. The Ping command can be used to
determine whether a destination is reachable from the communications module or not. Traceroute helps in
determining intermediate hops to the destination IP address.
Login → Maintenance → Ping and Traceroute
To ping or traceroute:
1. Enter an IP Address.
2. Select Ping or Traceroute.
3. Click Apply.
4. The status bar indicates the command executed.
5. The Results section displays the results of the executed command.
Copyright 2012 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • info@talkaphone.com• www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
WEBS-CM-2, WEBS-PA-1 and WEBS-PA-2
2
5
Figure 27 Ping and Traceroute
Configuration and Operation Manual
3
1
4
Page 23 of 53