Talk-a-Phone WEBS-CM-2 Configuration And Operation Manual page 53

Appendix D: Network Port Requirements
The network for communications module Series communications modules should allow the following:

IPv4 enabled

Allow the following protocols:
o
RTP
o
HTTP/HTTPS
o
SMTP

Routed network

DHCP Server (Optional)
Network elements:

Layer-2 Switch

WEBS Contact Server
Ports:
The following ports needs to be enabled on the communications module Series communications modules and
allowed across the firewall and routers in the network.
Service/Module
HTTP
FTP
SSH
Paging
STUN
WEBS Contact Port
SMTP Server Port
Copyright 2012 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • info@talkaphone.com• www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
WEBS-CM-2, WEBS-PA-1 and WEBS-PA-2
Configuration and Operation Manual
Port Port Type
80 TCP/UDP
21 TCP
22 TCP
5000 UDP
3478 UDP
3001 UDP
25 TCP/UDP
Mode
Inbound
Inbound
Inbound
Inbound
Inbound/Outbound
Inbound/Outbound
Inbound/Outbound
Page 53 of 53