4.6. Authentication
The Authentication page allows the administrator to change the user credentials used to access the
communications module through the Web interface or SSH.
Login → Authentication
To configure the authentication details:
1.
Enter the user credentials to access the Web interface:
Username
2
Password
sequence to be used by the Local User for deactivation of the corresponding Auxiliary Output.
Confirm password requires you to type the password again for reconfirmation.
2.
Check/uncheck the check box to Enable SSH access to the communications module.
3.
Enter Username and Password to configure/modify Authentication for SSH user.
4.
Click Apply to save settings.
1
The maximum number of characters in username is 30.
2
The maximum number of characters in password is 30.
Page 16 of 53
Copyright 2012 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • info@talkaphone.com • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
WEBS-CM-2, WEBS-PA-1 and WEBS-PA-2
2
5
Figure 22 Authentication
1
accepts alphanumeric and special characters (e.g., underscore "_" and period ".").
accepts alphanumeric values and special characters (except "&").Configure the Key Code
Configuration and Operation Manual
1
5
3
5