Talk-a-Phone WEBS-CM-2 Configuration And Operation Manual page 21

4.7.3. Logging
Log messages generated by the communications module can be captured for review. Enabling the "DEBUG"
option may degrade the communications module's performance. It is recommended to not use this option
unless required.
Login → Maintenance → Logging
To configure logging over the network:
1. Select the Network option. This option enables Logging Server fields.
2. Enter the Logging Server IP Address and the Logging Server Port.
3. Select the log levels for different modules from the drop-down menu.
4. Click Apply to save the settings.
Note To disable logging, select Nowhere (Disable)
Note To download and save the log file on the computer, click the Download link.
Note A maximum of 500 KB of logging data can be collected. On exceeding this limit, the older 250 KB of
logging data are purged from the log file.
Copyright 2012 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • info@talkaphone.com• www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
WEBS-CM-2, WEBS-PA-1 and WEBS-PA-2
Configuration and Operation Manual
Figure 25 Logging
4
1
2
3
Page 21 of 53