Pioneer CDJ-2000NXS Service Manual page 49

5
[9] Firmware update
The device and updater file name for update is the following.
Device
Main CPU (MAIN)
GUI CPU (GUI)
Panel microcomputer (PANEL)
Drive controller (DRIVE)
Four devices (one conclusion)
A version is not contained in a file name.
Since the character sequence containing a version etc. is added to the head of each file, it can check by the editor,
viewer, etc.
Moreover, "C2KNXS.UPD" which connected four files can be read.
When USB memory is used
Please use USB memory formatted by FAT/FAT32. It does not correspond to HFS+.
1 A file to update is copied to USB memory.
(One files will be copied if it is one pieces. Two files will be copied if it is two pieces. ......(It is one file if it is "C2KNXS.UPD"))
2 Please turn on a power supply, pushing both the buttons of MEDIA SELECT/USB and RELOOP.
(Please continue pushing until "Pioneer LOGO"screen disappears.)
It is displayed the message of "Connect a USB storage device to the USB port.", USB memory is inserted in USB port of
the front or the back. (If USB memory is put and it goes into the mode, a message will not be displayed but update will
start immediately.)
3 Update is automatically performed in the order of "GUI -> drive -> main -> panel".
The status is displayed with the bar graph and % as follows during update. Moreover, an old version and a new version
are also displayed.
4 When there is no file, gray out of the display of the device is carried out, and update is not performed.
And, %-display is a standard and is not exact.
5 Since the message of "Firmware update is completed.Turn the power off before using." will be displayed if update is
completed, please return on a power supply.
When CD-R/RW is used
1 A file to update is copied to CD-R/RW.
(One files will be copied if it is one pieces. Two files will be copied if it is two pieces. ......(It is one file if it is "C2KNXS.UPD"))
2 Please turn on a power supply, pushing both the buttons of MEDIA SELECT/DISC and RELOOP.
(Please continue pushing until "Pioneer LOGO"screen disappears.)
Insert CD-ROM, if the message "Insert CD-ROM disc" is displayed.
3 The rest is the same as that of the case where USB memory is used.
5
6
File Name
C2KNXSM.UPD Motorola formal text
C2KNXSG.UPD Binary text
C2KNXSP.UPD Motorola formal text
C2KNXSD.UPD Motorola formal text
C2KNXS.UPD Mixture of text form and binary form
CDJ-2000NXS
6
7
Remarks
7
8
A
B
C
D
E
F
49
8