Pioneer CDJ-2000NXS Service Manual page 47

5
Step command
Perform the serial movement of the setup by a step.
If a CUE/LOOP CALL NEXT (d) button is pushed, it will step up (even if it pushes PREV (c) button, the stripes of the
step down are not carried out). Operation and a display of each step are as follows.
Step
STEP0 : Servo All Off
STEP1 : Laser diode on
STEP2 : Disc presence judgment
STEP3 : Spindle on (2000 rpm)
STEP4 : Disc sense
STEP5 : Focus serve on
STEP6 : Tracking servo on
STEP7 : Focus position coarse adjustment
STEP8 : Focus gain adjustment
STEP9 : Tracking gain adjustment
STEP10 : Address lead start
CUE/LOOP CALL NEXT (d) button : step up
Mode Change (The end of the test movement mode)
If the MASTER TEMPO button is pushed into "test operation mode", MASTER TEMPO LED will light out, and it will
shift to the above-mentioned "player operation mode." It is indicated with [PLAYER MODE] in the indication part.
5
6
Action Indication Part
ALL OFF
LD ON
DISC SEARCH
SPINDLE ON
DISC SENSE
FOCUS ON
TRACKING ON
FOCUS POSITION
FOCUS GAIN
TRACKING GAIN
ADDRESS READ
CDJ-2000NXS
6
7
7
8
A
B
C
D
E
F
47
8