Pioneer CDJ-2000NXS Service Manual page 40

1
7 Drive LD life reset
A
B
8 Drive LD life manual input
C
D
9 A check of auto standby
E
F
40
1
2
The addition time which the laser diode of CD/DVD had turned on is reset.
In addition, this is used only once, when a drive unit is exchanged newly.
The addition time which the laser diode of CD/DVD had turned on is inputted
manually.
In addition, this is used only once, when a main unit is exchanged newly.
QUANTIZE button:
BROWSE button:
TAG LIST button:
INFO button:
MENU button:
TIME MODE button: It memorizes.
Usually, there are no media to reproduce, and when prolonged operation is not
performed, it shifts to the auto standby mode.
However, in this mode, it can shift to the auto standby mode immediately.
If operation excluding the following from the state of being in the auto standby
mode is performed,
• Push the USB STOP button
• JOG rotation (except for touching the Table top)
• Turn the TOUCH/BRAKE and RELEASE/START volumes
• Move the TEMPO slider
• Touch the needle search ribbon
• Switch the DIRECTION lever
It will return from the auto standby mode.
Since a return is the same processing as power supply ON, the service mode is
ended.
CDJ-2000NXS
2
3
Select CD/DVD
Increase the grade of 1000
Increase the grade of 100
Increase the grade of 10
Increase the grade of 1
3
4
4