Pioneer CDJ-2000NXS2 Service Manual
  1. Manuals
  2. Brands
  3. Pioneer Manuals
  4. Turntable
  5. CDJ-2000NXS2
  6. Service manual
Pioneer CDJ-2000NXS2 Service Manual

Pioneer CDJ-2000NXS2 Service Manual

Multi player
Hide thumbs Also See for CDJ-2000NXS2:
Table of Contents

Advertisement

Quick Links

Download this manual
MULTI PLAYER
CDJ-2000NXS2
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model
Type
CDJ-2000NXS2
SYXJ
CDJ-2000NXS2
UXJCB
CDJ-2000NXS2
FLXJ
CDJ-2000NXS2
AXJ
THIS SERVICE MANUAL SHOULD BE USED TOGETHER WITH THE FOLLOWING MANUAL(S).
Model
CDJ-2000NXS2
PIONEER CORPORATION
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 2 Jalan Kilang Barat, #07-01, Singapore 159346
Pioneer DJ Corporation 2016
Power Requirement
AC 110 V to 240 V
AC 110 V to 240 V
AC 110 V to 240 V
AC 220 V
Order No.
RRV4646
SCHEMATIC DIAGRAM, PCB CONNECTION DIAGRAM, PCB PARTS LIST
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan
CDJ-2000NXS2
Remarks
K-MZV FEB.
ORDER NO.
RRV4645
Remarks
2016 Printed in Japan

Advertisement

Table of Contents
loading

Related Manuals for Pioneer CDJ-2000NXS2

Summary of Contents for Pioneer CDJ-2000NXS2

  • Page 1 PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 2 Jalan Kilang Barat, #07-01, Singapore 159346 Pioneer DJ Corporation 2016 K-MZV FEB.

  • Page 2: Safety Information

    Health & Safety Code Section 25249.6 - Proposition 65 IMPORTANT Laser Pickup specifications and Laser characteristics THIS PIONEER APPARATUS CONTAINS For DVD Wave length (typ) : 655 nm LASER OF CLASS 1. Operation output : 3 mW CW, Class 1...

  • Page 3: Table Of Contents

    9. EXPLODED VIEWS AND PARTS LIST..........................71 9.1 PACKING SECTION ..............................71 9.2 EXTERIOR SECTION ..............................73 9.3 CONTROL PANEL SECTION ............................75 9.4 JOG DIAL SECTION ..............................77 9.5 DISPLAY SECTION ..............................79 9.6 SLOT IN MECHA SECTION ............................81 CDJ-2000NXS2...

  • Page 4: Service Precautions

    As the Jog FL is integrated with the FL Holder (DNF1735) with the aid of two pieces of double-back tape (Z12-016), first remove the integrated Jog FL and FL Holder, attach a new Jog FL and an FL Holder, using two pieces of double-back tape, then mount them together. CDJ-2000NXS2...

  • Page 5: Service Notice

    The settings can be stored for backup in a USB memory device or an SD card. For details on how to back up and restore data, see "g How to Back Up and Restore the Settings" in "8.6 ITEMS FOR WHICH USER SETTINGS ARE AVAILABLE." CDJ-2000NXS2...
  • Page 6 When there is no above type LED, take measures the following method. Step 1: After the power is turned off, wait 2 minutes. Step 2: Connect the Register Jig and leave the unit as it is, for 10 seconds. CDJ-2000NXS2...

  • Page 7: Specifications

    Before shipping out the product, be sure to clean the following positions by using the prescribed cleaning tools. Position to be cleaned Name Part No. Remarks Pickup lens Cleaning liquied GEM1004 Refer to "9.6 SLOTIN MECHA SECTION". Cleaning paper GED-008 CDJ-2000NXS2...

  • Page 8: Check Points After Servicing

    (This procedure can determine if the drive is degraded.) DVD test disc (GGV1025) See the table below for the items to be checked regarding audio. Item to be checked regarding audio Distortion Volume too high Noise Volume fluctuating Volume too low Sound interrupted CDJ-2000NXS2...

  • Page 9: Pcb Locations

    2..JOGB ASSY DWX3709 1..SRVA ASSY DWM2570 2..SRVB ASSY DWX3696 1..SLDB ASSY DWX3705 2..INSW ASSY DWX3697 2..SPCN ASSY DWX3698 1..HLED ASSY DWX3700 2..INDB ASSY DWX3699 > 1..SW POWER SUPPLY ASSY DWR1548 SLOTIN MECHA G11 ASSY DXA2163 TM ASSY 09SD-S DXX2697 CDJ-2000NXS2...

  • Page 10: Block Diagram

    4. BLOCK DIAGRAM TFT-LCD MODULE (CWX4352-) CN4401 *HORIZONTAL CKS6625-A CN4801 CKS4428-A Anode CN4601 TOUCH PANEL (DSX1130-) Cathode DKN1445-A FOR DEBUG V+3R3_CPU *VERTICAL *VERTICAL V+3R3_CPU USB CONNECTOR USB CONNECTOR CN6301 CN4001 (A-TYPE) (B-TYPE) GNDD VKN1418-A VKN1418-A GNDD V+12 V+12 REST_ER SD CARD *HORIZONTAL V+12 V+12...

  • Page 11: Signal Block Diagram

    TOUCH PANEL LCD MODULE CN5001 JA5101 JA5102 CN4802 CN4801 CN4401 SD Card USB Jack USB Jack A TYPE B TYPE DIGITAL RGB Connector IC4601 32MB SDRAM HLED ASSY 5,11 5,11 IC4604 6-8, 6-8, 12-14 12-14 IC4603 32MB SDRAM GUI CPU CLK:13.3333MHz SDCB ASSY LED KEY...

  • Page 12: Power Supply Block Diagram

    DCDC Regulator Other Device (Voltage) CN4001 CN6301 SW POWER MAIN ASSY LCDB ASSY EUPB ASSY JFLB ASSY V+12 3 Color SUPPLY ASSY Touch Pannel CN1501 V+12E CN1701 CN4002 KSWB ASSY Mute V+12E V+12E V+3R3E V+3R3E (+12V) V+12E IC4204 IC8001 for Ever DCDC PANEL CPU BD9328EFJ...

  • Page 13: Diagnosis

    Communication between MAIN CPU and SRVO Communication between MAIN CPU and PANEL CPU The insertion of the disc is possible. Communication between MAIN CPU and GUI CPU LED initial lighting Device select screen Canceling reset Apple AUTHENTICATION CHIP (IC14) CDJ-2000NXS2...
  • Page 14 Tracking gain adjustment Focus gain adjustment Focus gain adjustment Focus position adjustment TOC (control data) Tr open reading Control data reading Acquisition of addresses Searching for the 1st piece of Searching for the top address music (SPDL acceleration starts) CDJ-2000NXS2...

  • Page 15: Failure Judgement Of The Pickup Assy

    Disconnect* the FFC connected to the CN7001 then measure the resistance value between FFC pins 23 and 24. • Tracking side Disconnect* the FFC connected to the CN7001 then measure the resistance value between FFC pins 21 and 22. Failure judgment: A value out of the range of the specifications is judged as failure. CDJ-2000NXS2...

  • Page 16: Troubleshooting

    Item to be Checked Corrective Action Reference The SW POWER SW POWER Check V+12E. If V+12E (CN2 pin 5) is not output, the SW ————— SUPPLY Assy SUPPLY Assy POWER SUPPLY Assy is defective. Replace it. does not function properly. CDJ-2000NXS2...
  • Page 17 • B7 : B2 (pin 34 : 39) to identify a defective part then correct G7 : G2 (pin 42 : 47) connection or replace the defective part with R7 : R2 (pin 50 : 55) a new one. CDJ-2000NXS2...
  • Page 18 L when the SW is pressed, up to the SW. that SW is defective. Replace it. Defective MAIN Assy If the symptom persists after the above The MAIN CPU (IC10) is defective. ————— MAIN CPU corrections. Replace the MAIN CPU (IC10). CDJ-2000NXS2...
  • Page 19 Remove any foreign object, if present. ————— SW ring between the SW ring and Holder. Check if the cushions that are adhered to Replace the SW cushion with a new one. ————— Holder the Holder and SW ring have worn out. CDJ-2000NXS2...
  • Page 20 Check V+5_USB of the USB power supply. If V+5_USB can be confirmed, go to 5. ————— is defective. If V+5_USB cannot be confirmed and V+5_USB_D can be confirmed, go to 3. If V+5_USB_D cannot be confirmed, go to 4. CDJ-2000NXS2...
  • Page 21 If the symptom persists after the above The LAN-HUB & PHY (IC604) may be defective. ————— LAN-HUB & PHY corrections. Replace it. If the symptom persists, the MAIN CPU (IC10) MAIN CPU may be defective. Replace the MAIN CPU (IC10). CDJ-2000NXS2...
  • Page 22 The loading detection SWs (S9001 and S9002) may 5.4 OPERATIONAL signal errors signal lines. (The LPS1 and LPS2 signals be improperly soldered or defective. Resolder them, WAVEFORMS becomes L when the SW is set to ON.) if necessary. If the symptom persists, replace them. CDJ-2000NXS2...
  • Page 23 If an AC signal is not output, check the soldering at the CN7001–IC7002 of the pickup. If soldering is improper, resolder it. If soldering is OK, replace the parts in the order of (1) FEP (IC7002), (2) DRIVER IC (IC7001), (3) SODC (IC7006), (4) SRVB Assy, then (5) traverse mecha. CDJ-2000NXS2...
  • Page 24 If it is broken, replace it. of cables Defective SW ————— ————— When there is not a problem with Step 3, the ————— POWER SUPPLY SW POWER SUPPLY Assy is defective. Assy Replace it. CDJ-2000NXS2...
  • Page 25 Check the connection of the parts at the periphery of ————— the power-supply IC that does not output the voltage. error 3.3 V, 1.5 V, VREF1, VREF2 and VHALF). If the symptom persists after a corrective action, the power supply block is defective. Replace it. CDJ-2000NXS2...
  • Page 26 If the track data are not output In 3 "Auto device diagnosis", although loading and rotating are properly Check whether be indicated with performed, see "[7] ATAPI DRIVE." "DRIVE OK ". In other cases, see "[8] DRIVE ASSY." CDJ-2000NXS2...
  • Page 27 MAIN CPU and LAN-HUB & PHY (IC604). The signal line may be loosely connected. LAN-HUB & PHY Correct it if it is. ————— ————— If the symptom persists after the above Replace the LAN-HUB & PHY (IC604). ————— corrections. CDJ-2000NXS2...
  • Page 28 Check the connections of communication Check the connections between MAIN CPU ————— between the line between the MAIN CPU (IC10) and (IC10) and FLASH (IC12). MAIN CPU and FLASH (IC12). The signal line may be loosely connected. FLASH Correct it if it is. CDJ-2000NXS2...
  • Page 29 If it is L, one or more of the error detection current detection circuit for V+12_JFL or monitoring circuit functions was activated. V+12_LED, respectively, was activated. Check the load circuit. If the anode of D4206, D4205, or D4204 is H, the excess voltage detection circuit was activated. CDJ-2000NXS2...

  • Page 30: Operational Waveforms

    Search (CD-DA/DVD-MP3) 1-ch TE, 2-ch TEDRV, 3-ch SLIN1, 4-ch SLIN2 Stop (CD/DVD) Setup (CD/DVD) 1-ch FE, 2-ch FEDRV, 3-ch TE, 4-ch SPIN 1-ch FE, 2-ch FEDRV, 3-ch SPIN, 4-ch SPDLFG Playback (CD/DVD) 1-ch FE, 2-ch TE, 3-ch SLIN1, 4-ch SLIN2 CDJ-2000NXS2...

  • Page 31: Connection Confirmation With The Pc

    If the indication changes from 1 to 2 then 3, the link is properly established. If the cable is disconnected, the indication returns to 1. 5. After checking is completed, press the MENU/UTILITY key. The screen displayed before the MENU/UTILITY key was pressed will be restored CDJ-2000NXS2...

  • Page 32: Service Mode

    When you turn on the power while pressing the both "TEMPO" and "MEMORY" buttons simultaneously, " SERVICE MODE" will be displayed on the LCD to enter service mode. (Please hold all the buttons until "Pioneer LOGO" screen disappears.) In this mode, you can check whether the buttons, knobs and Jog dial on the unit work normally or not.
  • Page 33 BEAT SYNC MASTER BEAT SYNC MASTER MASTER REKORDBOX REKORDBOX REKORDBOX QUANTIZE QUANTIZE QUANTIZE SLIP SLIP SLIP *1: The LED of the HOT CUE buttons lights up in white. *2: Includes lighting up of the STANDBY-LED and the DISC SLOT-LED. CDJ-2000NXS2...
  • Page 34 Colorbar All-white screen All-green screen All-blue screen Confirmation of the Touch display operation Display LCD color patterns, as mentioned above, then select an all-black screen. Touch the screen and verify that a plus sign lights at the touched position. CDJ-2000NXS2...
  • Page 35 CSV file 7.12 8.17 under the name "JOGLOAD_2000NXS2.C 8.68 The new data is added whenever the MASTER TEMPO 8.17 button is pressed. 8.54 MAC address is written fro individual identification. 7.82 8.24 137(NG) (judge : 150ms <= Time <= 190ms) CDJ-2000NXS2...
  • Page 36 [SERVICE MODE] will be displayed on the LCD display indicating that the service mode has started. (Please continue pushing until "Pioneer LOGO" screen disappears.) In this mode, if you press the TAG-TRACK button to scroll, the display will change as follows.
  • Page 37 In addition, this is used only once, when a main unit is exchanged newly. QUANTIZE button: Select CD/DVD BROWSE button: Increase the grade of 1000 TAG LIST button: Increase the grade of 100 INFO button: Increase the grade of 10 MENU button: Increase the grade of 1 TIME MODE button: It memorizes. CDJ-2000NXS2...
  • Page 38 • Turn the TOUCH/BREAK , RELEASE/START volume • Move the TEMPO slider • Switch the DIRECTION lever Auto standby mode will be reset. Since auto standby reset is the same processing as turning the power on, the service mode will be ended. CDJ-2000NXS2...
  • Page 39 When the communication with MAIN is not communicated. materialized by the abnormalities of connection, GUI displays an error code spontaneously. When MAIN does not operate completely, it will be in this mode. E-9101 MECHANICAL TIMEOUT Mechanism operation was not completed within regulation time. CDJ-2000NXS2...
  • Page 40 As for "CD-LD Life Check" and "DVD-LD Life Check", the working time of the LD is displayed when it exceeded the predetermined period of time (7000H). ("OK" is displayed when it is not exceeded 7000H, and the working time is not displayed.) CDJ-2000NXS2...
  • Page 41 (5) DISC MOTOR CHECK Detects the defect of the spindle motor. Starts the spindle motor and checks the time to reach 2000 rpm. (6) CD ERROR RATE CHECK An error rate is measured and the final check is performed. CDJ-2000NXS2...
  • Page 42 When the FWD direction was pressed when a SINGLE LAYER DISC is in the deck. → L0 inside → L0 middle → L0 outside → When the REV direction was pressed when a SINGLE LAYER DISC is in the deck. ← L0 inside ← L0 middle ← L0 outside ← CDJ-2000NXS2...
  • Page 43 [SLIDER FWD] will be displayed in the drive condition indication section. Slider Move Rev When the [SEARCH REV] button is pressed, the slider will move to about 1.8 mm to the direction of inner perimeter. [SLIDER REV] will be displayed in the drive condition indication section. CDJ-2000NXS2...
  • Page 44 If the MASTER TEMPO button is pressed in the "test operation mode", MASTER TEMPO LED will light off and servo will stop. The mode will be switched to the "player operation mode" as mentioned above. [PLAYER MODE] will be displayed in the drive condition indication section. CDJ-2000NXS2...
  • Page 45 In addition to "[3] Various displayed information"_"3 Auto device diagnosis" the test port output on the main board can identify abnormalities of each device when the power of the device is turned on and initialized. If a failure is detected in the device when the power is on, the alarm port will output the pulse signal as follows: Normal Alarm Port Service Mode/Auto Device Diagnostic Display...
  • Page 46 2 Turn on the power while pressing both of the MEDIA SELECT/USB button and the RELOOP button. (Please continue pressing until "Pioneer LOGO"screen disappears.) Insert a USB memory stick in the USB port when the message "Connect USB storage device into USB port." appears.

  • Page 47: About The Device

    The "****" part of the part number changes each time the firmware is updated. Two or more FLASH and SDRAM are mounted in the main body. Please diagnose it after confiming whether it is a device that agrees with purpose again. CDJ-2000NXS2...

  • Page 48: Disassembly

    (3) Remove the Panel. Screw tightening order The other screws are random order. Panel Front • Bottom view (4) Remove the Plate, by removing the 5 screws. (BPZ30P100FTC) Plate Front • Bottom view Diagnosis SRVB Assy Front • Bottom view CDJ-2000NXS2...
  • Page 49 Screw tightening order • Rear view Front • Bottom view (3) Remove the Control panel Section. Control panel Section [2] MAIN Assy (1) Remove the SD earth spring, by removing SD earth spring Shield plate the 1 screw. (BPZ30P080FNI) CDJ-2000NXS2...
  • Page 50 (7) Remove the 3 screws. (BBZ30P060FTB) • Rear view Screw tightening order MAIN Assy (8) Disconnect the Power switch from the shaft. (9) Stand the MAIN Assy with the USBA and USBA Assy SDCB Assemblies. SDCB Assy Diagnosis Shaft Power switch CDJ-2000NXS2...
  • Page 51 The cables from the AC inlet Pull the cables must be placed at a level lower so that they will than the insulator-mold line. not protrude upward. Insulator-mold SW POWER SUPPLY Assy Cord clamper AC inlet CDJ-2000NXS2...
  • Page 52 (2) Remove the Mecha plate. Mecha plate Cord with plug Note of earth spring Earth spring • Be sure not to lose it. Mecha plate • Be careful to the installation places. • Confirm it by viewing. This boss is not installation position. CDJ-2000NXS2...
  • Page 53 (3) Remove the Slotin mechanism section. Slotin mechanism section TM Assy-S [1] Float Base Section (1) solder the short-circuit point. (short) Pickup Note: After working, connect the flexible cable, then remove the soldered joint (open). for DVD for CD • Rear view CDJ-2000NXS2...
  • Page 54 (2) Disconnect the 1 connector and 3 flexible cables. (CN7001, 7003, 7004, 7009) SRVB Assy CN7003 CN7004 CN7009 CN7001 • Bottom view (3) Remove the 4 DM screws. (DBA1260) CDJ-2000NXS2...
  • Page 55 Float spring G5 Float spring G5 (6) Remove the Float base Section. Direction of the dampers when attaching them When attaching the dampers, place them so that their projections (large) face rear. Projection (large) to the rear Damper Float base Section CDJ-2000NXS2...
  • Page 56 (4) Unhook the 2 hooks. (5) Remove the SPCN Assy. TM Assy-S Front Cleaning the pickup lens Before shipment, be sure to clean the pickup lens, using the following cleaning materials: Cleaning liquid : GEM1004 Cleaning paper: GED-008 Pickup lens CDJ-2000NXS2...
  • Page 57 Screw tightening order CN6303 Jog dial Section CN8501 • Bottom view Front • Bottom view Position of the Adjust plate About details of Adjustment etc., refer to the “8.4 JOG DIAL ROTATION LOAD ADJUSTMENT”. Adjust plate • Bottom view CDJ-2000NXS2...
  • Page 58 (5) Unhook the 3 hooks. (6) Remove the Jog Section. Jog Section (7) Remove the 3 screws. (DBA1265) SW ring ×3 (8) Remove the SW ring. Note: Be careful not to lost SW spring. SW spring CDJ-2000NXS2...
  • Page 59 5. When making a connection, be sure to first release the lock of the connector then securely Holder relock the connector after making the connection. Holder Pasting position of the SW cushion HH48/2 SW cushion HH48/2 (×9) Sheet SW CDJ-2000NXS2...
  • Page 60 Rack plate Link gear A Reference information Screw tightening order (JFLB Assy) Screw tightening order (Link plate) The other screws are random order. The other screws are random order. JFLB Assy Link plate • Bottom view • Bottom view CDJ-2000NXS2...
  • Page 61 (1) Remove the Knob/SLD. ×2 (2) Remove the 2 Knobs. Knob Knob/SLD • Sheet/FFC (1) Remove the Sheet/FFC, by removing the 1 rivet. Sheet/FFC • Bottom view • Sheet (1) Remove the 3 screws. Sheet Sheet ×3 (BPZ30P080FNI) Front • Bottom view CDJ-2000NXS2...
  • Page 62 • Bottom view (BPZ30P080FNI) Screw tightening order The other screws are random order. • SLDB Assy (1) Remove the Plate, by removing the 4 screws. (BPZ30P080FNI) ×4 Screw tightening order The other screws are random order. Front Plate • Bottom view CDJ-2000NXS2...
  • Page 63 (ABZ30P060FTC) CN4004 (3) Remove the 10 screws. CN4005 (BPZ30P080FNI) PNLB Assy Screw tightening order The other screws are random order. • Bottom view (4) Remove the all PCB Assemblies. PNLB Assy EUPB Assy SLDB Assy HLED Assy KSWB Assy CDJ-2000NXS2...
  • Page 64 • Bottom view • Exterior Section (1) Remove the Dial knob. Dial knob ×6 (2) Remove the Cover, by removing the 2 screws. (BBZ26P060FTB) Cover (3) Remove the Shield case, by removing the 6 screws. (BBZ26P060FTB) Shield case • Bottom view CDJ-2000NXS2...
  • Page 65 • TFT LCD and Touch panel (1) Remove the TFT LCD. (2) Remove the Panel/TCP. (3) Remove the Spacer/LCD. TFT LCD (4) Remove the Touch panel. (5) Remove the Plate/GND. Panel/TCP Jumper wire styling Spacer/LCD To LCDB Assy Slit CN4801 Slit Touch panel Plate/GND CDJ-2000NXS2...

  • Page 66: Each Setting And Adjustment

    ∗: For confirmation of the touch display operation, refer to "Confirmation of the Touch display operation" in "[1] Check mode of the buttons and displays" of "6.1 SERVICE MODE." 8.2 FIRMWARE UPDATE / RECOVERY For details on updating of firmware and recovery of the main unit, see “[9] Firmware update” in “6.1 SERVICE MODE.” CDJ-2000NXS2...

  • Page 67: Writing The Serial Number Of The Unit

    OK. 3 Enter a "$CDJ" command then click on OK. 6 Enter a "?N" command then click on OK to check the serial 4 Enter a "1MC" command then click on OK. number. CDJ-2000NXS2...

  • Page 68: Jog Dial Rotation Load Adjustment

    Remove the screw fixing the adjust plate, then screw it into the hole corresponding to the value (-1, -2, -3, -4, +1, +2 or +3) for a load to be added: -1, -2, -3, -4 : To decrease the load +1, +2, +3 : To increase the load CDJ-2000NXS2...

  • Page 69: Tempo Zero Point Adjustment

    Pin 5: ADIN J8708 J8709 Insulation sheet S8701 TEMPO RESET 2 Match the knob section of slide VR with J8701 CENTER POSITION. Knob section of slide VR J8704 VR8702 (Zero Poin ADJ) C8702 VR8701 CENTER POSITION SIDE A SLDB ASSY CDJ-2000NXS2...

  • Page 70: Items For Which User Settings Are Available

    1. Connect the storage device (SD, USB) on which the settings are stored. 2. Press the device button (SD or USB). 3. Press the [MENU/UTILITY] button. 4. Use the rotary selector to select and enter [LOAD] at [MY SETTINGS]. CDJ-2000NXS2...

  • Page 71: Exploded Views And Parts List

    For the applying amount of lubricants or glue, follow the instructions in this manual. (In the case of no amount instructions, apply as you think it appropriate.) 9.1 PACKING SECTION FLXJ only SYXJ only AXJ5 only AXJ5 only AXJ5 only Front • Bottom view CDJ-2000NXS2...
  • Page 72 See Contrast table (2) NSP 19 Name Label See Contrast table (2) NSP 20 CCC S Label See Contrast table (2) (2) CONTRAST TABLE CDJ-2000NXS2/SYXJ, UXJCB, FLXJ and AXJ5 are constructed the same except for the following: CDJ-2000NXS2 CDJ-2000NXS2 CDJ-2000NXS2 CDJ-2000NXS2 Mark...

  • Page 73: Exterior Section

    • Bottom view Refer to "9.3 CONTROL PANEL SECTION". Refer to SLMB "9.6 SLOTIN MECHA SECTION". CN9001 Stteping SPCN motor Pickup...
  • Page 74 35 Sheet DEC3660 36 Heat Cond Sheet DEB2041 37 Heat Cond Sheet DEB2042 38 Cushion DEC3679 39 Gasket DEC3681 40 Cushion DEC3687 41 Cushion DEC3688 42 Gasket/JOG DEC3562 43 Damper CNV7618 44 Earth Spring DBH1398 45 Float Spring (G5) DBH1494 CDJ-2000NXS2...
  • Page 75 • Bottom view Refer to "9.4 JOG DIAL SECTION". Refer to "9.5 DISPLAY SECTION". MAIN CN1701 Lubricating oil Button Button Mode Lens (GEM1104) Base Lever 2/4 or 3/4 Shaft area Shaft area 3/4 or 2/4 • Top view...
  • Page 76 37 Gasket/JOG DEC3562 38 Sheet DEC3614 39 Brake DEC3634 40 DS ADH Sheet DEH1070 41 DS ADH Sheet DEH1071 42 DS ADH Sheet DEH1072 43 DS ADH Sheet DEH1073 44 DS ADH Sheet DEH1074 45 DS ADH Sheet DEH1075 CDJ-2000NXS2...

  • Page 77: Jog Dial Section

    9.4 JOG DIAL SECTION Holder Lubricating oil (GYA1001) Lubricating oil (GEM1034) Lubricating oil (GEM1034) Lubricating oil Lubricating oil (GEM1034) (GEM1034) KSWB CN8501 HLED Lubricating oil CN6303 (GYA1001) Lubricating oil (GYA1001) CDJ-2000NXS2...
  • Page 78 32 Leaf Spring/ADJ DBK1376 33 • • • • • 34 • • • • • 35 • • • • • 36 • • • • • 37 Screw (FE) DBA1265 38 Screw BPZ20P100FTC 39 Screw BPZ30P080FNI 40 Screw IPZ20P060FTC CDJ-2000NXS2...

  • Page 79: Display Section

    9.5 DISPLAY SECTION • Bottom view PNLB CN8002 PNLB CN8001 HLED CN6301 MAIN CN1701 CDJ-2000NXS2...
  • Page 80 DNH3173 21 Shield Case DNH3220 22 Stay DNH3221 23 Control Panel DNK6465 24 Cover DNK6466 25 Holder DNK6467 26 Lens DNK6468 27 • • • • • 28 • • • • • 29 Screw BBZ26P060FTB 30 Screw BPZ26P080FTC CDJ-2000NXS2...

  • Page 81: Slot In Mecha Section

    CN7003 Lubricating oil (GYA1001) Dyfree Dyfree (GEM1036) (GEM1036) Lubricating oil (GYA1001) Cleaning liquid (GEM1004) Cleaning paper (GED-008) SRVB CN7001 SRVB Note: CN7004 The TM Assy 09SD-S is supplied only in assembly form, not as a single parts. SRVB CN7009 CDJ-2000NXS2...
  • Page 82 32 Front Sheet DED1132 33 Inside SW Base DNK4236 34 Float Base G11 Assy DXB1793 35 Binder ZCA-SKB90BK 36 Float Fastener DBA1286 37 Screw VBA1062 38 Screw IPZ20P060FTC NSP 39 Lead Wire (JP1901) ZWNN1007G28-8-07A NSP 40 Lead Wire (JP1902) ZWNN1007G28-9-07A CDJ-2000NXS2...

Table of Contents