Pioneer CDJ-2000NXS Service Manual page 45

5
[7] Confirmation of movement of the drive unit
It is within "[3] Indication of Various Information" mode, and the following control becomes possible when the screen of
"6 the drive operation/error rate measurement" is chosen.
This mode consists of "player operation mode" and "test operation mode."
<Player operation mode>
Basic operation of Servo, such as setup, play, pause, and track search, is carried out.
Moreover, measurement of an error rate can also be performed.
<Test operation mode>
Servo operation is finely controllable gradually.
* It becomes player operation mode and shifts to test operation mode by the key input in the beginning.
* The command treated here is for mainly testing a mechanism and a servo system, and is not for DJ functions, such as scan
and tempo.
Function
<Player operation mode>
Servo All Off (Stop)
Play(Trace) / Pause
Track Search Fwd/Rev
Error Rate Count
Eject
Mode Change (-> Test operation mode)
<Test operation mode>
Servo All Off
CD Select
DVD Select
Focus Jump Up
Focus Jump Down
Slider Move Fwd
Slider Move Rev
Step command
Mode Change (->Player operation mode)
Player operation mode command
Play(Trace) / Pause
If it is in a stop state, it will set up and play. Moreover, if it is in a play state, whenever it will push a button, a pause and a
play are carried out by turns.
It is displayed on a drive state display part as "PLAY or PAUSE."
In the case of CD, the track number and time under present trace are displayed.
In the case of DVD, the layer number under present trace is displayed on the place of TRACK, and it displays a physical
address on the place of MSF.
Note: In this mode, even if it inserts a disk, an automatic setup is not carried out.
Moreover, a play is not carrying out audio reproduction, but is tracing the signal side of a disk.
Track Search F/R
Search a track displayed by a FWD / REV course and, in the case of a CD, do pause.
It is indicated with [SEARCH] in the drive condition indication part.
Note: A track search is not possible in CD-ROM (MP3/AAC/WAV/AIFF).
Whenever a FWD / REV direction is pushed, search it with the following turn and, in the case of DVD, do a pause.
When a FWD direction was pushed with DUAL LAYER DISC.
→ L0 inside → L0 middle → L0 outside → L1 inside → L1 middle → L1 outside →
When a REV direction was pushed with DUAL LAYER DISC.
← L0 inside ← L0 middle ← L0 outside ← L1 inside ← L1 middle ← L1 outside ←
When a FWD direction was pushed with SINGLE LAYER DISC.
→ L0 inside → L0 middle → L0 outside →
When a REV direction was pushed with SINGLE LAYER DISC.
← L0 inside ← L0 middle ← L0 outside ←
5
6
Main unit button
TIME
PLAY/PAUSE
TRACK SEARCH FWD/REV
CUE
EJECT
MASTER TEMPO
TIME
MEMORY
DELETE
LOOP IN
LOOP OUT
SEARCH FWD
SEARCH REV
CUE/LOOP CALL NEXT(d)
MASTER TEMPO
CDJ-2000NXS
6
7
7
8
A
B
C
D
E
F
45
8