ADJ WiFly EXR Dotz Par User Instructions page 12

WiFly EXR Dotz Par
Beam angle 66°
Field angle 103°
Intensity(LUX)
Red LEDs 128 34
Green LEDs 239 68
Blue LEDs 325 81
Full LEDs 646 175
4
3
2
Lens Off
1
0
1
2
3
4
0 1 2
66° Diameter(m) 1.27 2.55
103° Diameter(m) 2.61 5.21
Beam angle 20°
Field angle 25°
Intensity(LUX)
Red LEDs 2470 815
Green LEDs 3260 1054
Blue LEDs 5060 1644
Full LEDs 11950 3280
4
3
2
Lens On
1
0
1
2
3
4
0 1 2
20° Diameter(m) 0.35 0.71
25° Diameter(m) 0.45 0.88
ADJ Products, LLC - www.adj.com - WiFly EXR Dotz Par User Manual Page 22
Photometrics
15 8 5
29 16 10
38 22 14
81 48 31
66 103
3 4 5
3.82 5.10 6.37
7.82 10.43 13.03
406 241 147
540 316 198
839 486 324
1545 940 611
20 25
3 4 5
1.06 1.41 1.76
1.33 1.77 2.21
WiFly EXR Dotz Par
The WiFly EXR Dotz Par comes with 66 degree lens already attached.
The lens is held in place by two magnets on either side. To remove
the lens simply rotate the lens so that lens comes off its magnets and
lift to remove. The other way to remove it is to grab the edges of the
lens and life up. When the lens is removed the fixture will have a 20
degree beam angle.
WiFly EXR Dotz Par
The included shield is block unwanted light exposure when the fixture
is used for uplighting. To attach the shield locate the thumb screws
on each side of the unit. Remove the thumb screws, place the shield
on the unit lining up the screw holes on the shield with screw holes on
the unit. Reinsert the thumb screws and tighten.
WiFly EXR Dotz Par
The standing angle of the unit can be manually adjusted by turning
the knob on the front panel counter clockwise. Turning this knob will
allow the bottom front part of the unit to lower so that the unit can sit
at a desired angle. Turn the knob clockwise to lock the position.
WiFly EXR Dotz Par
Ramp Effect
Standard
Stage
TV
Architectural
Theatre
ADJ Products, LLC - www.adj.com - WiFly EXR Dotz Par User Manual Page 23
Removable Lens
Shield Attachment
Adjustable Sitting Angle
Dimmer Curve Chart
(Fade Time) (Fade Time)